Genuine Kawasaki Fuel Tank Cap — OEM Part #51048-0026
Get reliable starts and steady power back with a genuine Kawasaki Fuel Tank Cap. Built for the Mule models, it matches the original connections and specifications, so fuel delivery stays where the factory calibration expects it.
Tanks, pumps, injectors, carburetors, lines and emissions parts must deliver clean fuel at the right pressure and keep vapors sealed. A small leak or weak part affects starting, power and safety. This part is confirmed for 28 Kawasaki models from 2008 to 2027. See the full fitment list below.
Fuel Tank Cap at a Glance
-
OEM part number: 51048-0026
-
Brand: Kawasaki (genuine factory part)
-
Part type: Gas Cap
-
Fits: Mule utility side-by-side models, 2008–2027
-
Condition: New
Kawasaki Models and Years This Fuel Tank Cap Fits
Genuine Kawasaki part #51048-0026 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 600 |
2008–2016 |
| Kawasaki Mule 610 4x4 |
2008–2016 |
| Kawasaki Mule 610 4x4 SE Fleet |
2016 |
| Kawasaki Mule 610 4x4 XC |
2010–2016 |
| Kawasaki Mule 610 4x4 XC Camo |
2015–2016 |
| Kawasaki Mule 610 4x4 XC SE |
2015–2016 |
| Kawasaki Mule 4000 |
2009–2023, 2025–2027 |
| Kawasaki Mule 4000 Trans |
2018–2021, 2025–2027 |
| Kawasaki Mule 4010 4x4 |
2009–2027 |
| Kawasaki Mule 4010 4x4 FE |
2021–2025 |
| Kawasaki Mule 4010 4x4 SE |
2016–2018 |
| Kawasaki Mule 4010 Trans 4x4 |
2009–2027 |
| Kawasaki Mule 4010 Trans 4x4 Camo |
2015–2023, 2025–2027 |
| Kawasaki Mule 4010 Trans 4x4 FE |
2021–2025 |
| Kawasaki Mule 4010 Trans 4x4 SE |
2016–2018 |
| Kawasaki Mule SX |
2017–2027 |
| Kawasaki Mule SX 4x4 |
2017–2019, 2024–2027 |
| Kawasaki Mule SX 4x4 FE |
2023–2025 |
| Kawasaki Mule SX 4x4 FI |
2019–2023 |
| Kawasaki Mule SX 4x4 SE |
2017–2019 |
| Kawasaki Mule SX 4x4 SE FI |
2020–2021 |
| Kawasaki Mule SX 4x4 XC |
2017–2020, 2024–2027 |
| Kawasaki Mule SX 4x4 XC Camo |
2017–2019 |
| Kawasaki Mule SX 4x4 XC Camo FI |
2019–2021 |
| Kawasaki Mule SX 4x4 XC FI |
2019–2023 |
| Kawasaki Mule SX 4x4 XC LE |
2024–2027 |
| Kawasaki Mule SX 4x4 XC LE FI |
2019–2023 |
| Kawasaki Mule SX 4x4 XC SE |
2017–2019 |
Why Choose a Genuine Kawasaki OEM Fuel Tank Cap?
- Correct fit with factory fittings and connectors
- Maintains the fuel delivery your engine is calibrated for
- Fuel- and ethanol-resistant materials
- Helps keep emissions and vapor systems compliant
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM fuel part, part #51048-0026
- Original line sizes, connectors, jets and mounting
- Built for gasoline and ethanol-blend exposure
- Designed for the listed Kawasaki models
- Works with factory fuel injection, carburetor and EVAP systems
Materials and Construction
Kawasaki fuel parts use ethanol-resistant hose and seals, polyethylene or steel tanks, corrosion-resistant pump, injector and carburetor parts, and fittings that seal under vibration.
Common Reasons Owners Replace This Part
- Fixing hard starting, stalling or hesitation
- Repairing fuel leaks or fuel smell
- Replacing parts damaged by stale or bad fuel
- Restoring emissions and EVAP parts
Signs Your Fuel Tank Cap Needs Replacing
- Hard starting or long cranking
- Stalling, surging or hesitation under load
- Fuel smell or visible leaks
- Check engine light tied to fuel or EVAP (fuel-injected models)
- Cracked lines, fittings or tank parts
Installation Tips
- Work in a ventilated area away from sparks and relieve fuel pressure first on fuel-injected models.
- Disconnect the battery before working on pumps or wiring.
- Use the Kawasaki parts diagram to confirm routing, clamps and O-rings.
- Install with fresh seals and secure every clamp and connector.
- Check for leaks before starting the engine.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #51048-0026 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Fuel Tank Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Fuel Tank Cap?
The genuine Kawasaki part number is 51048-0026. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #51048-0026 fit?
It fits 28 Kawasaki Mule models from 2008 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Can ethanol fuel damage my fuel system?
Ethanol blends attract moisture and can degrade older parts, especially carburetors. Follow your owner's manual for recommended fuel.
Should I replace the fuel filter too?
If your model has a serviceable filter, replacing it during fuel work is a good idea.
Why does it run poorly after sitting?
Stale fuel can varnish carburetor jets, injectors and pumps. Use stabilizer for storage and drain old fuel.
Order Your Genuine Kawasaki Fuel Tank Cap Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Fuel Tank Cap, OEM part #51048-0026, from Witchdoctors today and keep your Mule models running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.