CruzArmor Fuel Tank Protection Kit for Indian Chieftain & Roadmaster

The fuel tank on your bike take a beating from rocks, road grime, boots, zippers and luggage. The CruzArmor Fuel Tank Protection Kit for Indian Chieftain & Roadmaster (part number IND-002c-GL) is a precut, self-healing protective film kit that covers the fuel tank so your original finish stays like new.

It's made for the Indian Chieftain and Roadmaster models. Each piece is computer-cut to the shape of the panel for a clean, factory look, and it installs at home with basic prep.

Why Choose CruzArmor

CruzArmor started with self-healing helmet shield protection for desert racers and applies the same film technology to precut motorcycle kits for Victory and Indian bikes.

Key Features

• Precut kit for the fuel tank
• Self-healing urethane film: light scratches and swirls disappear over time
• Optically clear (gloss) or matte finish
• Protects against stone chips, scratches, scuffs, bug splatter and road grime
• UV resistant to resist yellowing
• Removable without damaging paint when removed properly
• DIY installation with included instructions

Options

• Gloss (IND-002c-GL) or Matte (IND-002c-MT)
• Part number: IND-002c-GL

Fitment and Compatibility

Made for the Indian Chieftain and Roadmaster models. Tagged for 38 configurations, including Chieftain 2014-2023 and Chieftain Dark Horse 2014-2023. Kits are cut for the stock panels, so they may not fit aftermarket or modified parts. Contact our team with your year, model and trim if you're not sure.

What Is Paint Protection Film?

Paint protection film (PPF) is a thin, clear urethane film applied over painted or finished surfaces. It takes the hits from stone chips, boot scuffs, zippers, bug splatter and road grime so your paint doesn't. The same type of film is used on cars, motorcycles and helmet shields.

Self-Healing Film

CruzArmor film is self-healing: light scratches and swirl marks in the top layer level out over time, faster with warmth from the sun or a warm engine. Deep cuts through the film won't heal, but they stay in the film instead of your paint.

Gloss or Matte?

Choose gloss for glossy paint and chrome-look finishes; it's nearly invisible and keeps the shine. Choose matte for matte or satin paint; it protects without adding gloss. You can also use matte film on gloss paint for a two-tone look.

Before You Install

• Wash the bike and let it dry.
• Remove wax, sealants and ceramic coatings from the area, or the film won't stick well.
• Repair or polish out existing scratches first; film shows what's underneath.
• Have a spray bottle, squeegee, microfiber cloths and a heat gun or hair dryer ready.

Installation Steps

• Work in a clean, shaded area at room temperature.
• Wash the area, then wipe it with rubbing alcohol or a prep spray to remove wax and oils.
• Test-fit each piece before removing the backing.
• Spray the surface and the film's adhesive side with a slip solution (water with a few drops of baby shampoo) so you can slide it into position.
• Squeegee from the center out to push out water and air.
• Wrap edges carefully and press them down firmly.

Cure Time and First Wash

Let the film cure for at least 24-48 hours before washing, and avoid pressure washing the edges for about a week. Small water bubbles under the film usually evaporate on their own in a few days in warm weather.

Care and Cleaning

Wash with mild soap and water and a soft microfiber. Don't aim a pressure washer at the film edges. You can wax or use ceramic spray over the film; avoid abrasive polishes and solvent cleaners.

Removing the Film

If you ever need to remove it, warm the film with a hair dryer or heat gun on low and peel it back slowly at a sharp angle. Clean any adhesive residue with a dedicated adhesive remover that's safe for paint.

Build a Full Protection Package

CruzArmor makes matching kits for fenders, tanks, saddlebags, lids, side covers, lower fairings and headlights, so you can protect the high-wear areas of your bike in one go.

Why Protect New Paint?

Touring bikes rack up scratches in predictable places: the tank from zippers and belt buckles, saddlebag lids from luggage, lowers from road debris and fenders from stone chips. Protecting those areas when the bike is new keeps it looking showroom-fresh and helps resale value.

Why Buy From Witchdoctors

Witchdoctors is a Victory and Indian specialist, and we carry CruzArmor protection kits for Cross Country, Cross Roads, Challenger, Chieftain, Pursuit and Roadmaster models. Our team can help you choose the right kits for your bike.

Related Products

• CruzArmor Front Fender Protection Kit for Indian Challenger & Pursuit
• CruzArmor Front Fender Protection Kit for Indian Chieftain Dark Horse
• CruzArmor Front Fender Protection Kit for Indian Roadmaster
• CruzArmor Front Lower Saddlebag Protection Kit for Indian Challenger, Pursuit & Chieftain
• CruzArmor Fuel Tank Protection Kit for Indian Challenger & Pursuit

CruzArmor Paint Protection · Indian Chieftain Parts · Indian Roadmaster Parts · Cleaning & Detailing

Frequently Asked Questions

Is this genuine CruzArmor?

Yes. Witchdoctors sells genuine CruzArmor kits.

Will it damage my paint?

No. The film is designed to remove cleanly when warmed and peeled slowly.

Can I install it myself?

Yes. It's a DIY kit with instructions; take your time on prep for the best result.

Will it turn yellow?

The film is UV resistant to resist yellowing.

How long does it last?

With proper care, several years, per CruzArmor.

Can I wash and wax over it?

Yes, after it cures. Avoid pressure washing the edges.

Where to Ride

Protected paint, open road. Try one of these rides:

• Scenic Byway 12 (southern Utah): an All-American Road through red-rock canyon country
• Blue Ridge Parkway (North Carolina and Virginia): 469 miles of mountain curves with no commercial traffic

Order Today

Add the CruzArmor Fuel Tank Protection Kit for Indian Chieftain & Roadmaster to your cart. Questions about fit? Contact our team.

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.