Genuine Kawasaki Fuse Box Label — OEM Part #56033-0019
Bring back the factory finish on your Mule 3010 with a genuine Kawasaki Fuse Box Label. Faded, peeled or torn graphics make a machine look older than it is and can hurt resale value, and this OEM decal matches the original color, shape and placement exactly.
Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that must stay legible. This part is confirmed for 2 Kawasaki models from 2003 to 2007. See the full fitment list below.
Fuse Box Label at a Glance
-
OEM part number: 56033-0019
-
Brand: Kawasaki (genuine factory part)
-
Part type: Warning Label
-
Fits: Mule utility side-by-side models, 2003–2007
-
Condition: New
Kawasaki Models and Years This Fuse Box Label Fits
Genuine Kawasaki part #56033-0019 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 3010 4x4 Diesel |
2003–2007 |
| Kawasaki Mule 3010 Diesel 4x4 |
2007 and earlier |
Why Choose a Genuine Kawasaki OEM Fuse Box Label?
- Exact factory color match, so it blends with the graphics around it
- Pre-cut to the original outline, with no trimming
- Correct placement for the specific panel it was designed for
- Keeps your machine looking original, which helps at resale or trade-in
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM graphic, part #56033-0019
- UV-resistant inks made for outdoor powersports use
- Pressure-sensitive adhesive backing for a clean, bubble-free bond
- Sized and shaped for the original panel location
- Ready to apply. No paint, primer or special tools needed
Materials and Construction
Kawasaki factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic panels through heat cycles and vibration.
Common Reasons Owners Replace This Part
- Replacing graphics scratched or peeled by brush and roost
- Refreshing a machine before selling or trading it in
- Finishing a body panel replacement so it matches
- Replacing illegible safety or warning labels
Signs Your Fuse Box Label Needs Replacing
- Edges lifting or peeling away from the panel
- Colors faded or chalky from sun exposure
- Tears, scuffs or missing sections
- A new panel installed without its matching graphic
- Warning information you can no longer read
Installation Tips
- Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
- Clean off leftover adhesive, then wipe the area with isopropyl alcohol.
- Let the surface dry and work at room temperature (roughly 60–90°F).
- Peel back a small section of backing, align one edge, and press outward with a squeegee.
- Work across the decal to push out air, press the edges firmly and avoid pressure washing for 24–48 hours.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Fuse Box Label with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Fuse Box Label?
The genuine Kawasaki part number is 56033-0019. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #56033-0019 fit?
It fits the Mule 3010 4x4 Diesel (2003–2007); Mule 3010 Diesel 4x4 (2007 and earlier).
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Will this decal match my other graphics?
Yes. It is the genuine Kawasaki graphic for the listed models and years. Graphics on older machines may have faded slightly, so a new decal can look brighter at first.
Do I need to remove the panel to install it?
Usually not. Removing the panel can make cleaning and alignment easier on tight curves.
Can I apply it in cold weather?
For the best bond, apply it at room temperature. Warm the panel first if you are working in a cold garage.
About Availability of Part #56033-0019
This part is marked as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.