Genuine Indian & Polaris Fuse Cartridge 40A — OEM Part #4013891
Keep your Indian motorcycle solid and straight with a genuine Indian & Polaris Fuse Cartridge 40A. It is made to Indian's original dimensions, so engine, suspension and bodywork bolt back on in alignment.
Frames, engine cradles, mounts, kickstands and footrest mounts carry the engine and rider loads. A bent or cracked part affects handling and safety. Because Indian and Polaris are both Polaris Inc. brands, this part number is shared across Indian motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Fuse Cartridge 40A at a Glance
-
OEM part number: 4013891
-
Brand: Indian & Polaris (genuine Polaris-made OEM part)
-
Part type: Fuse Blocks & Mounts
-
Indian fitment: Challenger, Chief, Chieftain, Dark Horse, Elite, Pursuit, Roadmaster, Sport Chief, Springfield and Super Chief, 2012–2025
-
Polaris off-road fitment: General, RZR, Ranger, Rgr and Xpedition, 2018–2026
-
Condition: New
Models and Years This Fuse Cartridge 40A Fits
Genuine part #4013891 fits the models and years below, across Indian motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
62 Indian model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Indian Challenger |
2020–2024 |
6 |
| Indian Chief |
2012–2024 |
11 |
| Indian Chieftain |
2014–2025 |
15 |
| Indian Dark Horse |
2022 |
1 |
| Indian Elite |
2019 |
1 |
| Indian Pursuit |
2022–2024 |
7 |
| Indian Roadmaster |
2015–2025 |
10 |
| Indian Sport Chief |
2023–2024 |
1 |
| Indian Springfield |
2016–2025 |
8 |
| Indian Super Chief |
2022–2024 |
2 |
Polaris Off-Road Vehicle Fitment
219 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris General |
2021, 2024–2026 |
13 |
| Polaris RZR |
2019–2026 |
79 |
| Polaris Ranger |
2018–2026 |
115 |
| Polaris Rgr |
2026 |
2 |
| Polaris Xpedition |
2024–2026 |
10 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Indian & Polaris OEM Fuse Cartridge 40A?
- Factory geometry and alignment
- Original mounting points for engine and bodywork
- Correct isolators and bushings to control vibration
- Restores safe, stable handling
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian & Polaris OEM frame or mount part, part #4013891
- Original dimensions and hardware locations
- Corrosion-resistant finish
- Designed for the listed Indian & Polaris models
- Works with factory isolators and fasteners
Materials and Construction
Indian frames and mounts use welded steel or cast aluminum with powder-coat or e-coat finishes, plus rubber isolators where vibration control matters.
Common Reasons Riders Replace This Part
- Repairs after a crash or tip-over
- Replacing a bent kickstand or mount
- Replacing worn engine mounts or isolators
- Restoring a bike with frame damage
Signs Your Fuse Cartridge 40A Needs Replacing
- Bent kickstand or bike leaning too far
- Excess vibration from worn mounts
- Cracks or bends after an impact
- Misaligned bodywork or wheels
- Loose or missing mounting hardware
Installation Tips
- Support the bike and engine safely before removing mounts.
- Follow the Indian service manual for torque specs and sequence.
- Replace isolators and hardware as specified.
- Check alignment of wheels and bodywork after installation.
- Recheck torque after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #4013891 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Fuse Cartridge 40A with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian & Polaris Fuse Cartridge 40A?
The genuine part number is 4013891. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #4013891 fit?
It fits 62 Indian models (Challenger, Chief, Chieftain, Dark Horse, Elite, Pursuit, Roadmaster, Sport Chief, Springfield and Super Chief) from 2012 to 2025. See the Indian fitment table above.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 219 Polaris off-road models, including the General, RZR, Ranger, Rgr and Xpedition. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian and Polaris models, not an aftermarket copy.
Is my kickstand bent?
If the bike leans much farther than usual, it may be. Our blog has a diagnostic guide.
Can a bent frame be straightened?
Frame repair needs a specialist and a frame jig. Replacing damaged parts is safer.
Do I need new hardware?
Replace any fastener that was stretched, corroded or specified as one-time-use.
Order Your Genuine Indian & Polaris Fuse Cartridge 40A Today
Keep your Indian motorcycle or Polaris off-road vehicle on the road. Add the genuine Indian & Polaris Fuse Cartridge 40A (part #4013891) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.