Genuine Can-Am Handle Bar Upper Clamp A — OEM Part #A53210131000
Steer with confidence again with a genuine Can-Am Handle Bar Upper Clamp A. Built for the Renegade models, it matches the factory splines, joints and mounting points, so the steering feels tight and works with Dynamic Power Steering (DPS) where equipped.
The steering wheel or handlebar, column, rack, tie rods and power steering unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 7 Can-Am models from 2023 to 2026. See the full fitment list below.
Handle Bar Upper Clamp A at a Glance
-
OEM part number: A53210131000
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Handlebar Mounts & Clamps
-
Fits: Renegade sport ATV models, 2023–2026
-
Condition: New
Can-Am Models and Years This Handle Bar Upper Clamp A Fits
Genuine Can-Am part #A53210131000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Renegade sport ATV Fitment
| Model |
Model Years |
| Can-Am Renegade 70 EFI Carb |
2023–2026 |
| Can-Am Renegade 70 EFI Epa |
2023 |
| Can-Am Renegade 110 EFI (International) |
2024–2026 |
| Can-Am Renegade 110 EFI Carb |
2023–2026 |
| Can-Am Renegade 110 EFI Epa |
2023 |
| Can-Am Renegade 110 EFI X xc |
2023–2026 |
| Can-Am Renegade X xc 110 EFI (International) |
2023–2026 |
Why Choose a Genuine Can-Am OEM Handle Bar Upper Clamp A?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Can-Am DPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM steering part, part #A53210131000
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Can-Am models
- Works with factory DPS units, sensors and wiring where applicable
Materials and Construction
Can-Am steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed DPS motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing DPS faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Handle Bar Upper Clamp A Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or a DPS warning
- Bent tie rods or an off-center wheel
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Can-Am parts diagram for hardware, cotter pins and DPS connectors.
- Disconnect the battery before working on DPS parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #A53210131000 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Handle Bar Upper Clamp A with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Handle Bar Upper Clamp A?
The genuine Can-Am part number is A53210131000. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #A53210131000 fit?
It fits 7 Can-Am Renegade models from 2023 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does DPS need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Can-Am Handle Bar Upper Clamp A Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Handle Bar Upper Clamp A, OEM part #A53210131000, from Witchdoctors today and keep your Renegade models running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.