Handlebar Switch, Left 9010-160600-A000 by CFMOTO

Genuine CFMoto Handlebar Switch, Left — OEM Part #9010-160600-A000

Steer with confidence again with a genuine CFMoto Handlebar Switch, Left. Built for the CForce 500, this OEM part matches the factory splines, joints and mounting points, so the steering feels tight and returns to center the way it did when new.

The steering wheel or handlebars, column, rack, tie rods and electronic power steering (EPS) all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 3 CFMoto models from 2007 to 2013. See the full fitment list below.

Handlebar Switch, Left at a Glance

• OEM part number: 9010-160600-A000
• Brand: CFMOTO (genuine factory part)
• Part type: Handlebar Control Switch
• Position: Left
• Fits: CForce ATV models, 2007–2013
• Condition: New

CFMoto Models and Years This Handlebar Switch, Left Fits

Genuine CFMoto part #9010-160600-A000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Why Choose a Genuine CFMoto OEM Handlebar Switch, Left?

• Factory fit with the original rack, column and linkage
• Restores tight, precise steering feel
• Works with CFMoto EPS where equipped
• Helps keep alignment and tire wear in check
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM steering part, part #9010-160600-A000
• Matches original splines, threads and joints
• Corrosion- and impact-resistant construction
• Designed for the listed CFMoto models
• Works with factory EPS units, sensors and wiring where applicable

Materials and Construction

CFMoto steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and, for EPS systems, sealed motors and electronic modules designed for water and vibration.

Common Reasons Riders Replace This Part

• Fixing play, clunks or wandering
• Replacing bent tie rods or shafts after an impact
• Repairing EPS faults or a heavy steering feel
• Restoring steering on a high-hour machine

Signs Your Handlebar Switch, Left Needs Replacing

• Free play or looseness in the steering
• Clunking or knocking when turning
• Heavy steering or an EPS warning light
• Bent tie rods or a steering wheel off center
• Torn boots on tie-rod ends or the rack

Installation Tips

1. Point the wheels straight and lock the steering before disconnecting parts.
2. Use the CFMoto parts diagram for hardware, cotter pins and EPS connectors.
3. Disconnect the battery before working on EPS components.
4. Install the new part, matching the original spline position or tie-rod length.
5. Torque to spec, set toe, and check full lock-to-lock travel before riding.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Handlebar Switch, Left with these parts and supplies:

• UTV tie rods — Tie rods and tie-rod ends
• Steering racks and power steering — Racks, bearings and EPS components
• Steering wheels and quick releases — Steering wheels and hubs
• Drivetrain and steering — More drivetrain and steering parts
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Bad UTV & ATV Tie Rods? Signs, Symptoms & How to Fix
• How to Inspect ATV Handlebar Safety | Stop The Wobble
• Is Your UTV/ATV Steering Knuckle Bent? How to Tell
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Handlebar Switch, Left?

The genuine CFMoto part number is 9010-160600-A000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9010-160600-A000 fit?

It fits the CForce 500 (2009); CForce 500 LWB (2007–2008); CForce 500 SWB (2007–2008, 2013).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Do I need an alignment after replacing steering parts?

Yes. Tie rods and steering components affect toe. Set it after installation to prevent wander and tire wear.

Does the EPS need to be calibrated?

Some CFMoto EPS systems need a reset or calibration after service. Check your service manual or ask a dealer.

Is this part safe to straighten instead of replace?

No. Bent steering parts should always be replaced. Straightened parts can fail without warning.

Order Your Genuine CFMoto Handlebar Switch, Left Today

Ride with confidence on parts built for your machine. Order the genuine CFMoto Handlebar Switch, Left, OEM part #9010-160600-A000, from Witchdoctors today and keep your CForce 500 running the way CFMoto designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Burning Rock Offroad Park — Tams, West Virginia: 100 miles of trails (UTVs up to 64 in. wide)
• The Mounds ORV Park — Mt. Morris, Michigan: a 370-acre park open year-round