Indian Engine Harness 2414783

Genuine Indian Engine Harness — OEM Part #2414783

Electrical gremlins can strand you far from home. The genuine Indian Engine Harness plugs into your Indian motorcycle with the original connectors and ratings, so it works with the factory wiring, ECM and gauges.

Harnesses, switches, relays, sensors, the stator, regulator, starter, ECM, gauges and audio all work together. A wrong or weak part causes no-starts, warning lights or dead accessories. This part is confirmed for 35 Indian models from 2020 to 2026.

Engine Harness at a Glance

• OEM part number: 2414783
• Brand: Indian (genuine Polaris-made OEM part)
• Part type: OEM Harness
• Indian fitment: Challenger, Chieftain, Dark Horse, Pursuit and Roadmaster, 2020–2026
• Condition: New

Models and Years This Engine Harness Fits

Genuine part #2414783 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Indian Motorcycle Fitment

Why Choose a Genuine Indian OEM Engine Harness?

• Plug-and-play fit with factory connectors
• Correct electrical ratings
• Weather-sealed for rain and washing
• Works with the factory ECM, gauges and diagnostics
• Sold by Witchdoctors, an Indian and Victory OEM parts specialist

Features and Materials

Key Features

• Genuine Indian OEM electrical part, part #2414783
• Original connectors and pin-outs
• Water- and vibration-resistant construction
• Designed for the listed Indian models
• No splicing or adapters needed

Materials and Construction

Indian electrical parts use tinned copper wiring, sealed connectors, heat-resistant insulation and potted or sealed housings for modules, sensors and the charging system.

Common Reasons Riders Replace This Part

• Fixing no-start, no-charge or intermittent faults
• Replacing a failed stator or regulator
• Replacing switches, relays or sensors
• Restoring gauges, audio or accessories

Signs Your Engine Harness Needs Replacing

• Battery not charging or dying
• No-start or clicking
• Warning lights or gauge faults
• Melted or corroded connectors
• Switches or audio that do not work

Installation Tips

1. Disconnect the negative battery cable first.
2. Use the Indian parts and wiring diagrams for routing and connectors.
3. Clean corroded terminals and apply dielectric grease where specified.
4. Make sure every connector clicks and seals.
5. Route wiring away from heat and moving parts, then test.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #2414783 and every part installed with it in the factory parts diagrams for your model:

• 2022 Indian Challenger Dark Horse parts diagrams
• 2022 Indian Challenger Elite parts diagrams
• 2022 Indian Challenger Limited parts diagrams
• 2022 Indian Challenger Standard parts diagrams
• All Indian Motorcycle OEM parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Indian Ecm Mount Anti Vibration Foam (#5522319)
• Indian Trumpet Horn (#4019095)
• Indian Lower Bracket Harness Tray (#5454990)
• Indian Starter Clutch Hub (#1205295)

Recommended Accessories and Maintenance Supplies

Pair your Engine Harness with these parts and supplies:

• Stators and regulators — Charging system parts
• Battery tenders — Keep your battery charged
• Ignition parts — Ignition components
• Audio and speakers — Audio upgrades
• Indian Challenger parts — more parts for your Challenger
• Indian Pursuit parts — more parts for your Pursuit

Helpful Guides from the Witchdoctors Blog

• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride
• How to Store a Motorcycle for Winter: Essential Tips and Steps
• Victory & Indian Motorcycle Spring Inspection Checklist

Frequently Asked Questions

What is the OEM part number for this Indian Engine Harness?

The genuine part number is 2414783. Use it to match this part to your factory parts diagram.

Which Indian motorcycles does part #2414783 fit?

It fits 35 Indian models (Challenger, Chieftain, Dark Horse, Pursuit and Roadmaster) from 2020 to 2026. See the Indian fitment table above.

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.

How do I know if my stator is bad?

Low charging voltage at the battery with the engine running is a common sign. Test before replacing.

Will this need programming?

Most plug-in parts do not. Some modules may need dealer setup.

Why does my battery keep dying?

Check the charging system, connections and any parasitic drain before replacing the battery.

Order Your Genuine Indian Engine Harness Today

Keep your Indian motorcycle on the road. Add the genuine Indian Engine Harness (part #2414783) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Back of the Dragon (VA 16) — Marion to Tazewell, Virginia: 32 miles over three mountains
• Red Rock Scenic Byway (SR 179) — Sedona, Arizona: red-rock buttes on a short, smooth ride