Genuine Can-Am Heat Shield B — OEM Part #S80102RCA000
Keep heat and noise where they belong with a genuine Can-Am Heat Shield B. Built for the DS 250, it bolts to the original mounts so the exhaust stays sealed, quiet and clear of plastics, wiring and riders.
The exhaust routes hot gas away from the engine, controls noise and keeps heat away from panels, wiring and riders. Loose shields and leaks lead to melted parts and failed inspections. This part is confirmed for 1 Can-Am model from 2010 to 2026. See the full fitment list below.
Heat Shield B at a Glance
-
OEM part number: S80102RCA000
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Heat Barrier
-
Fits: DS youth and sport ATV models, 2010–2026
-
Condition: New
Can-Am Models and Years This Heat Shield B Fits
Genuine Can-Am part #S80102RCA000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am DS youth and sport ATV Fitment
| Model |
Model Years |
| Can-Am DS 250 |
2010–2026 |
Why Choose a Genuine Can-Am OEM Heat Shield B?
- Factory fit and clearances
- Keeps noise at factory levels for trail rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM exhaust part, part #S80102RCA000
- Original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed Can-Am engines
- Pairs with OEM gaskets and hardware on the same diagram
Materials and Construction
Can-Am exhaust parts are heat-resistant steel or stainless steel. Heat shields use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Heat Shield B Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing from a leak
- Melted or discolored plastics near the exhaust
- Soot around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil, since exhaust bolts often seize.
- Replace gaskets at every joint you open.
- Fit with hardware loose, align for clearance, then tighten to spec.
- Run the engine and check for leaks, rattles and clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #S80102RCA000 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Heat Shield B with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Heat Shield B?
The genuine Can-Am part number is S80102RCA000. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #S80102RCA000 fit?
It fits the DS 250 (2010–2026).
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails require a working, approved spark arrestor. Check local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need a tune. OEM keeps factory noise and performance.
Should I reuse exhaust gaskets?
No. They crush when tightened and rarely reseal.
Order Your Genuine Can-Am Heat Shield B Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Heat Shield B, OEM part #S80102RCA000, from Witchdoctors today and keep your DS 250 running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.