Genuine Can-Am Hex Flanged Screw M8x75 — OEM Part #207687544
Skip the hardware-store guesswork. The genuine Can-Am Hex Flanged Screw M8x75 matches the thread pitch, length, strength grade and head style of the original, so it fits your Can-Am ATV or side-by-side the first time and holds under vibration.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 29 Can-Am models from 2021 to 2026. See the full fitment list below.
Hex Flanged Screw M8x75 at a Glance
-
OEM part number: 207687544
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: OEM Screw
-
Fits: Defender utility side-by-side, Outlander ATV and Traxter utility side-by-side models, 2021–2026
-
Condition: New
Can-Am Models and Years This Hex Flanged Screw M8x75 Fits
Genuine Can-Am part #207687544 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Defender utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Defender HD11 LTD Cab |
2026 |
| Can-Am Defender HD11 X mr |
2026 |
| Can-Am Defender HD11 XT |
2026 |
| Can-Am Defender HD11 XT Cab |
2026 |
| Can-Am Defender HD11 XU (International) |
2026 |
| Can-Am Defender MAX HD11 Lone Star |
2026 |
| Can-Am Defender MAX HD11 Lone Star Cab |
2026 |
| Can-Am Defender MAX HD11 LTD Cab |
2026 |
| Can-Am Defender MAX HD11 X mr |
2026 |
| Can-Am Defender MAX HD11 XT |
2026 |
| Can-Am Defender MAX HD11 XT Cab |
2026 |
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander 6x6 650 EFI Xu+ (International) |
2021–2023 |
| Can-Am Outlander 6x6 EFI XT (International) |
2022 |
| Can-Am Outlander 6x6 EFI Xu+ (International) |
2021–2023 |
| Can-Am Outlander 6x6 Xu+ 650 EFI (Europe) |
2025 |
| Can-Am Outlander 6x6 Xu+ EFI (Europe) |
2025 |
| Can-Am Outlander 570 EFI (International) |
2022 |
| Can-Am Outlander 650 EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander MAX 6x6 650 EFI XT (International) |
2022 |
| Can-Am Outlander MAX 6x6 650 EFI Xu+ (International) |
2021–2023 |
| Can-Am Outlander MAX 6x6 EFI Xu+ (International) |
2021–2023 |
| Can-Am Outlander MAX 6x6 Xu+ 650 EFI (Europe) |
2025 |
| Can-Am Outlander MAX 6x6 Xu+ EFI (Europe) |
2025 |
| Can-Am Outlander MAX 650 EFI 6x6 Xu+ (International) |
2024 |
| Can-Am Outlander MAX EFI 6x6 Xu+ (International) |
2024 |
Can-Am Traxter utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Traxter HD11 XT (Europe) |
2026 |
| Can-Am Traxter HD11 XU (International) |
2026 |
| Can-Am Traxter MAX HD11 XU (International) |
2026 |
Why Choose a Genuine Can-Am OEM Hex Flanged Screw M8x75?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM hardware, part #207687544
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Can-Am assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Can-Am fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Hex Flanged Screw M8x75 Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Can-Am parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #207687544 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Hex Flanged Screw M8x75 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Hex Flanged Screw M8x75?
The genuine Can-Am part number is 207687544. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #207687544 fit?
It fits 29 Can-Am Defender, Outlander and Traxter models from 2021 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Can-Am Hex Flanged Screw M8x75 Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Hex Flanged Screw M8x75, OEM part #207687544, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.