Genuine CFMoto High-Pressure Fuel Hose — OEM Part #9DS#-120220-6000
Get reliable starts and steady power back with a genuine CFMoto High-Pressure Fuel Hose. Built for the CForce 600, this OEM part matches the original connections and specifications, so fuel delivery stays where the factory calibration expects it.
Fuel tanks, pumps, injectors, lines and emissions parts must deliver clean fuel at the right pressure and keep vapors sealed. A small leak or weak part affects starting, power and safety. This part is confirmed for 2 CFMoto models from 2022 to 2025. See the full fitment list below.
High-Pressure Fuel Hose at a Glance
-
OEM part number: 9DS#-120220-6000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Fuel Lines & Mounts
-
Fits: CForce ATV models, 2022–2025
-
Condition: New
CFMoto Models and Years This High-Pressure Fuel Hose Fits
Genuine CFMoto part #9DS#-120220-6000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 600 |
2022–2025 |
| CFMoto CForce 600 Touring |
2022–2025 |
Why Choose a Genuine CFMoto OEM High-Pressure Fuel Hose?
- Correct fit with factory fittings and connectors
- Maintains the fuel pressure and flow your engine is calibrated for
- Fuel- and ethanol-resistant materials
- Helps keep emissions and vapor systems compliant
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM fuel part, part #9DS#-120220-6000
- Matches original line sizes, connectors and mounting
- Built for gasoline and ethanol-blend exposure
- Designed for the listed CFMoto models
- Works with factory EFI and EVAP systems
Materials and Construction
CFMoto fuel system parts use ethanol-resistant hose and seals, high-density polyethylene or metal tanks, corrosion-resistant pump and injector components, and quick-connect fittings designed to seal under vibration.
Common Reasons Riders Replace This Part
- Fixing hard starting, stalling or hesitation
- Repairing fuel leaks or fuel smell
- Replacing parts damaged by stale or contaminated fuel
- Restoring emissions and EVAP components
Signs Your High-Pressure Fuel Hose Needs Replacing
- Hard starting or long cranking
- Stalling, surging or hesitation under load
- Fuel smell or visible leaks
- Check engine light related to fuel or EVAP
- Cracked lines, fittings or tank components
Installation Tips
- Work in a well-ventilated area away from sparks, and relieve fuel pressure before opening the system.
- Disconnect the battery before working on pumps or wiring.
- Use the CFMoto parts diagram to confirm routing, clamps and O-rings.
- Install the new part with fresh seals and secure every clamp and connector.
- Turn the key to prime the system, check for leaks, then start the engine.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #9DS#-120220-6000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the High-Pressure Fuel Hose and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your High-Pressure Fuel Hose with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto High-Pressure Fuel Hose?
The genuine CFMoto part number is 9DS#-120220-6000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #9DS#-120220-6000 fit?
It fits the CForce 600 (2022–2025); CForce 600 Touring (2022–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Can ethanol fuel damage my fuel system?
Ethanol blends can attract moisture and degrade older parts. CFMoto OEM fuel parts are made to handle common pump fuels; follow your owner's manual for the recommended fuel.
Should I replace the fuel filter at the same time?
If your model has a serviceable filter, replacing it during fuel system work is a good idea, especially after contamination.
Why does my machine run poorly after sitting?
Stale fuel can varnish injectors and pumps. Use fuel stabilizer for storage and drain old fuel before riding.
Order Your Genuine CFMoto High-Pressure Fuel Hose Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto High-Pressure Fuel Hose, OEM part #9DS#-120220-6000, from Witchdoctors today and keep your CForce 600 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.