Get rid of wheel wobble and keep your machine rolling smooth with the Factory Links Front Left & Right Wheel Bearing Kit for Honda TRX680FA.
Factory Links makes wheel bearings, kits and drivetrain parts designed for off-road ATVs and UTVs. Witchdoctors stocks genuine Factory Links parts by part number.
Why Choose the Factory Links Front Left & Right Wheel Bearing Kit for Honda TRX680FA
Worn wheel bearings cause wobble, clunks and play in the wheel, and a failed bearing can take out the hub or axle. This Factory Links kit is built for off-road abuse: double-lip nitrile seals keep out mud, water and dust, and the bearings are packed with heavy-duty marine grease at a 60% fill for harsh conditions.
Key Features
- Front left and right wheel bearing service
- Nitrile butadiene rubber double-lip oil seals keep out abrasives and moisture
- Heavy-duty premium marine grease with complex thickeners, virtually waterproof
- 60% grease fill (up from 30%) for harsh conditions
- Special V-groove inner race resists water intrusion
- Dust seals designed for off-road use
- Rust and corrosion protection
Specifications
-
Brand: Factory Links
-
Part number: AFW-H-016
-
Position: Front, left & right
-
Type: Wheel Bearing Kit
-
Seals: Nitrile double-lip
-
Grease: Heavy-duty marine grease, 60% fill
-
Contents: Bearings and seals for the listed position; check the package for exact quantities
Specifications are from Factory Links and catalog listings (verify before ordering).
Fitment
Listed to fit (per the Fitments tab on this page):
Confirm your year, make, model and the bearing position before ordering.
How to Choose
- Match the kit to your year, make and model in the fitment list.
- Check the position: front, rear or middle, and whether it covers both sides.
- Replace both sides at once if one side has failed; the other is often close behind.
Installation
- Safely lift and support the machine and remove the wheel.
- Remove the brake caliper, hub or knuckle as your service manual directs.
- Press or drive out the old bearings and seals; don’t reuse removed bearings.
- Clean the bore and check it for wear or damage.
- Press new bearings in by the outer race only, using a proper driver or press.
- Install new seals, reassemble and torque all fasteners to spec.
- Spin the wheel and check for play before riding.
Follow your service manual. If you don’t have a bearing press or drivers, have a qualified shop do the job.
Care Tips
- Check for wheel play every few rides, especially after mud or water crossings.
- Avoid aiming a pressure washer directly at hub seals.
- Replace bearings at the first sign of grinding, roughness or play.
Related Factory Links Parts
Shop ATV and UTV wheel bearings, wheel hubs and knuckles, wheel bearing grease and bearing grease tools.
Helpful Guides From the Witchdoctors Blog
Frequently Asked Questions
Is this genuine Factory Links?
Yes. Witchdoctors sells genuine Factory Links parts by part number.
How do I know my wheel bearings are bad?
Grab the tire at the top and bottom and rock it. Clunks, play, grinding or a rough feel when spinning the wheel are common signs. See our guide below.
Does it include seals?
Yes. The kit includes nitrile double-lip seals; check the package for exact contents.
Can I return it?
Contact our customer service team before installing it, and we’ll help under our return policy.
Where to Ride
Wheels spinning true again? Try one of these off-road destinations:
Order the Factory Links Front Left & Right Wheel Bearing Kit for Honda TRX680FA Today
Add the Factory Links Front Left & Right Wheel Bearing Kit for Honda TRX680FA to your cart, and Witchdoctors will get it moving. Questions about fit? Contact our team, and we’ll help.
General Safety Warning & Installation Requirements
Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle,
or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety
of your vehicle.
Important:
⚠️
Warning: Failure to follow manufacturer-specified installation procedures and
safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.
Important Fitment Disclosure
At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment
is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your
Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.
⚠️
Verification Required: While we strive for 100% accuracy, vehicle manufacturers often
make mid-year production changes. Always verify your specific year, make, and model before finalizing
your order.
Read More
Shipping
Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
Product Availability
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
Returns
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.