Badge

Hose Clamp 90450-64005-00 by Yamaha

Price
$11.49 USD
Normally ships in 6-8 business days

Inventory:

Loading..
SKU: 90450-64005-00
In stock and ready for shipping

SKU: 90450-64005-00

Genuine Yamaha Hose Clamp — OEM Part #90450-64005-00

Off-road engines live and die by clean air. The genuine Yamaha Hose Clamp seals the intake on your Wolverine models exactly as the factory intended, keeping dust, water and grit out of the throttle body or carburetor and cylinders.

The intake path, from inlet to air box to throttle body or carburetor, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 41 Yamaha models from 2021 to 2026. See the full fitment list below.

Hose Clamp at a Glance

  • OEM part number: 90450-64005-00
  • Brand: Yamaha (genuine factory part)
  • Part type: Boots & Intakes
  • Fits: Wolverine recreation side-by-side models, 2021–2026
  • Condition: New

Yamaha Models and Years This Hose Clamp Fits

Genuine Yamaha part #90450-64005-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 41 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Yamaha Wolverine recreation side-by-side Fitment

Model Family Model Years Trims
Yamaha Wolverine 2021–2022, 2024 8
Yamaha Wolverine RMAX2 2021–2026 16
Yamaha Wolverine RMAX4 2021–2026 15
Yamaha Wolverine X2 2025–2026 2

Why Choose a Genuine Yamaha OEM Hose Clamp?

  • Factory seal against dust, water and debris
  • Correct airflow for the factory fuel and ignition settings
  • Direct fit with original clamps, ducts and mounts
  • Helps prevent premature engine wear
  • Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support

Features and Materials

Key Features

  • Genuine Yamaha OEM intake part, part #90450-64005-00
  • Molded to original air box and duct dimensions
  • Heat- and fuel-vapor-resistant materials
  • Designed for dusty, muddy and wet riding
  • Works with factory air filters and sensors

Materials and Construction

Yamaha intake parts use rigid, heat-stable plastics for air box housings and lids, flexible rubber boots and ducts that seal under vibration, and filter media designed to trap fine dust while keeping airflow.

Common Reasons Riders Replace This Part

  • Replacing a cracked air box, lid or intake boot
  • Restoring the seal after water or mud intrusion
  • Routine filter and wear-item replacement
  • Fixing idle and performance problems from an air leak

Signs Your Hose Clamp Needs Replacing

  • Dust on the clean side of the air filter
  • Cracks or splits in boots, ducts or the air box
  • Rough idle, hesitation or a lean condition
  • Whistling or sucking noises from the intake
  • Water in the air box after a crossing

Installation Tips

  1. Check the Yamaha parts diagram for clamps, seals and duct routing.
  2. Remove the old part and clean dust from the air box and inlet.
  3. Install the new part, making sure every edge seals.
  4. Tighten clamps evenly without overtightening plastic fittings.
  5. Start the engine and check for air leaks and a smooth idle.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Yamaha Parts Diagrams for Your Machine

Find part #90450-64005-00 and every part installed with it in the factory Yamaha parts diagrams for your model:

Related OEM Parts for the Same Machines

Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Hose Clamp with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Yamaha Hose Clamp?

The genuine Yamaha part number is 90450-64005-00. Use it to match this part to your factory parts diagram.

Which Yamaha models does part #90450-64005-00 fit?

It fits 41 Yamaha Wolverine models from 2021 to 2026. The complete list is in the fitment tables above.

Is this a genuine Yamaha part?

Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.

How often should I check my air filter?

After every dusty ride if possible, and replace or clean it at the interval in your owner's manual or sooner.

Can an intake leak damage my engine?

Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly.

Will this change performance?

It restores factory airflow and sealing. If you had a leak, expect a smoother idle and better response.

Order Your Genuine Yamaha Hose Clamp Today

Get your Wolverine models back to factory condition. Add the genuine Yamaha Hose Clamp (part #90450-64005-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

Where to Ride Your Yamaha

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: