Genuine Yamaha Hose Clamp — OEM Part #90450-95802-00
Get smooth engagement and steady acceleration back with a genuine Yamaha Hose Clamp. Built for the Yamaha ATV or side-by-side, it matches the original CVT specification, so belt alignment, shift points and cooling airflow stay where they should.
The drive and driven pulleys, belt, covers and cooling ducts work as one system. Worn or mismatched parts cause belt slip, harsh engagement, overheating and early belt failure. This part is confirmed for 17 Yamaha models from 2018 to 2026. See the full fitment list below.
Hose Clamp at a Glance
-
OEM part number: 90450-95802-00
-
Brand: Yamaha (genuine factory part)
-
Part type: CVT Air Components
-
Fits: Viking utility side-by-side and Wolverine recreation side-by-side models, 2018–2026
-
Condition: New
Yamaha Models and Years This Hose Clamp Fits
Genuine Yamaha part #90450-95802-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Viking utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Viking |
2018–2020 |
| Yamaha Viking EPS |
2018–2026 |
| Yamaha Viking EPS Hunter |
2018–2021 |
| Yamaha Viking EPS Hunting |
2022 |
| Yamaha Viking EPS Ranch |
2018–2026 |
| Yamaha Viking EPS Ranch Edition |
2018–2023 |
| Yamaha Viking EPS SE |
2019 |
| Yamaha Viking EPS Special E |
2019 |
| Yamaha Viking VI EPS |
2018–2025 |
| Yamaha Viking VI EPS Hunter |
2018–2022 |
| Yamaha Viking VI EPS Huntin |
2022 |
| Yamaha Viking VI EPS Ranch |
2018–2025 |
| Yamaha Viking VI EPS Ranch Edition |
2019–2024 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine |
2018 |
| Yamaha Wolverine R |
2018 |
| Yamaha Wolverine R-Spec EPS |
2018 |
| Yamaha Wolverine R-Spec Hunter |
2018 |
Why Choose a Genuine Yamaha OEM Hose Clamp?
- Factory calibration for engagement and shift-out
- Correct belt alignment and deflection
- Keeps CVT cooling and sealing at factory standard
- Helps your drive belt last longer
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM CVT or clutch part, part #90450-95802-00
- Built to Yamaha's original clutch specifications
- Precision-machined surfaces where applicable
- Designed for the listed Yamaha drivetrains
- Works with OEM belts, covers, seals and ducts
Materials and Construction
Yamaha CVT and clutch parts use precision-machined aluminum sheaves and housings, hardened steel shafts, weights and rollers, wear-resistant bushings and friction materials, and heat-stable covers and ducts sealed against water and dust.
Common Reasons Riders Replace This Part
- Fixing belt slip, jerky engagement or poor top speed
- Replacing worn sheaves, weights, springs or bushings
- Repairing covers, seals and ducts after water intrusion
- Routine CVT service and belt replacement
Signs Your Hose Clamp Needs Replacing
- Belt slipping, squealing or a burning smell
- Jerky, harsh or delayed engagement
- Loss of top speed or pulling power
- Glazed belt or frequent belt failures
- Water or debris inside the CVT cover
Installation Tips
- Remove the CVT cover and clean out belt dust before taking anything apart.
- Use the correct Yamaha clutch tools; pulleys are under spring tension.
- Inspect sheave faces, weights, bushings and the belt while you are in there.
- Assemble to factory torque specs and check belt deflection and alignment.
- Replace cover seals and follow the belt break-in procedure.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #90450-95802-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Hose Clamp with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Hose Clamp?
The genuine Yamaha part number is 90450-95802-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #90450-95802-00 fit?
It fits 17 Yamaha Viking and Wolverine models from 2018 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace the belt at the same time?
If the belt is glazed, cracked or worn to minimum width, replace it with the clutch parts.
What causes CVT belts to burn up?
Riding in high range at low speed, heavy loads, water in the CVT and worn clutch parts. Use low range for slow, heavy work.
Do I need special tools?
Yes. Most Yamaha CVT pulleys need specific holding and puller tools to service safely.
Order Your Genuine Yamaha Hose Clamp Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Hose Clamp, OEM part #90450-95802-00, from Witchdoctors today and keep your Yamaha ATV or side-by-side running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.