Genuine Polaris Inlet Valve — OEM Part #3055636
Rebuild with confidence. The genuine Polaris Inlet Valve is the factory engine part for your RZR 200, machined to Polaris's original specification for proper clearances, sealing and long service life.
Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 7 Polaris models from 2021 to 2026. See the full fitment list below.
Inlet Valve at a Glance
-
OEM part number: 3055636
-
Brand: Polaris (genuine factory part)
-
Part type: Valves & Springs
-
Fits: RZR sport side-by-side models, 2021–2026
-
Condition: New
Polaris Models and Years This Inlet Valve Fits
Genuine Polaris part #3055636 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR 200 |
2021–2026 |
| Polaris RZR 200 Au |
2025 |
| Polaris RZR 200 Evap |
2023–2026 |
| Polaris RZR 200 MD |
2025 |
| Polaris RZR 200 Tld Au (International) |
2023 |
| Polaris RZR 200 Tld Evap |
2023 |
| Polaris RZR 200 Tld MD (International) |
2023 |
Why Choose a Genuine Polaris OEM Inlet Valve?
- Factory tolerances for correct clearances and fit
- Designed to work with the other OEM parts in the engine
- Helps protect any applicable factory warranty coverage
- Lowers the risk of a repeat teardown from a poor-fitting part
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM engine part, part #3055636
- Machined to Polaris's original specifications
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the listed engines
- Pairs with the gaskets and seals on the same parts diagram
Materials and Construction
Polaris engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Full or partial engine rebuilds
- Repairs after overheating or oil starvation
- Fixing oil leaks at cases, covers and seals
- Restoring compression and power on a high-hour engine
Signs Your Inlet Valve Needs Replacing
- Oil leaks around covers, cases or seals
- Ticking, knocking or rattling from the engine
- Low compression or noticeable power loss
- Blue or white smoke, or high oil use
- Metal debris in the oil or on the drain plug magnet
Installation Tips
- Follow the Polaris service manual for your model; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace any gaskets and seals you disturb.
- Measure critical clearances with proper tools before final assembly.
- Lubricate moving parts with clean engine oil or assembly lube as specified.
- Torque fasteners in sequence, refill fluids and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #3055636 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Inlet Valve with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Inlet Valve?
The genuine Polaris part number is 3055636. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3055636 fit?
It fits 7 Polaris RZR models from 2021 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Should I replace gaskets and seals at the same time?
Yes. Replace any gasket or seal you disturb. They are on the same Polaris parts diagram.
Is OEM worth it over aftermarket engine parts?
For internals, OEM parts match the exact clearances the engine was designed around, which helps avoid noise, wear and leaks.
Can I do this repair myself?
Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.
Order Your Genuine Polaris Inlet Valve Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Inlet Valve, OEM part #3055636, from Witchdoctors today and keep your RZR 200 running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Hatfield-McCoy Trails — southern West Virginia: multiple permit-access trail systems across the coalfields
-
Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas