Genuine Kawasaki Inner Door Handle, Right — OEM Part #46075-0666
Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine Kawasaki Inner Door Handle, Right restores the factory fit of the cab on your Ridge, so doors close cleanly, seals stay tight and everything lines up the way it did when new.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 17 Kawasaki models from 2024 to 2026. See the full fitment list below.
Inner Door Handle, Right at a Glance
-
OEM part number: 46075-0666
-
Brand: Kawasaki (genuine factory part)
-
Part type: Door Handle
-
Position: Right
-
Fits: Ridge ranch side-by-side models, 2024–2026
-
Condition: New
Kawasaki Models and Years This Inner Door Handle Fits
Genuine Kawasaki part #46075-0666 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Ridge ranch side-by-side Fitment
| Model |
Model Years |
| Kawasaki Ridge |
2026 |
| Kawasaki Ridge Crew |
2026 |
| Kawasaki Ridge Crew HVAC |
2025–2026 |
| Kawasaki Ridge Crew HVAC Camo |
2025–2026 |
| Kawasaki Ridge Crew Platinum Ranch Edition HVAC |
2026 |
| Kawasaki Ridge Crew ST HVAC |
2026 |
| Kawasaki Ridge HVAC |
2024–2026 |
| Kawasaki Ridge HVAC Camo |
2025–2026 |
| Kawasaki Ridge Limited |
2024–2025 |
| Kawasaki Ridge Limited HVAC |
2024–2025 |
| Kawasaki Ridge Platinum Ranch Edition HVAC |
2026 |
| Kawasaki Ridge Ranch Edition |
2024–2025 |
| Kawasaki Ridge ST HVAC |
2026 |
| Kawasaki Ridge XR Crew |
2025 |
| Kawasaki Ridge XR Crew HVAC |
2025 |
| Kawasaki Ridge XR Deluxe HVAC |
2025 |
| Kawasaki Ridge XR HVAC |
2024–2025 |
Why Choose a Genuine Kawasaki OEM Inner Door Handle?
- Factory fit with the ROPS, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure Kawasaki designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM cab part, part #46075-0666
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Kawasaki cab parts use materials matched to the job: coated steel for ROPS and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Owners Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Inner Door Handle Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on ROPS parts
Installation Tips
- Pull up the Kawasaki parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #46075-0666 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Inner Door Handle with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Inner Door Handle?
The genuine Kawasaki part number is 46075-0666. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #46075-0666 fit?
It fits 17 Kawasaki Ridge models from 2024 to 2026. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Kawasaki cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Kawasaki Inner Door Handle Today
Get your Ridge back to factory condition. Add the genuine Kawasaki Inner Door Handle, Right (part #46075-0666) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.