Genuine CFMoto Intake Air Inlet Pipe Heat Insulator — OEM Part #L-170440008-0001
Off-road engines live and die by clean air. The genuine CFMoto Intake Air Inlet Pipe Heat Insulator seals the intake on your CForce 110 exactly as the factory intended, keeping dust, water and grit out of the throttle body and cylinders.
The intake path, from snorkel to airbox to throttle body, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 1 CFMoto model from 2024. See the full fitment list below.
Intake Air Inlet Pipe Heat Insulator at a Glance
-
OEM part number: L-170440008-0001
-
Brand: CFMOTO (genuine factory part)
-
Part type: Boots & Intakes
-
Fits: CForce ATV models, 2024
-
Condition: New
CFMoto Models and Years This Intake Air Inlet Pipe Heat Insulator Fits
Genuine CFMoto part #L-170440008-0001 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 110 |
2024 |
Why Choose a Genuine CFMoto OEM Intake Air Inlet Pipe Heat Insulator?
- Factory seal against dust, water and debris
- Correct airflow for the factory fuel and ignition mapping
- Direct fit with original clamps, ducts and mounts
- Helps prevent premature engine wear
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM intake part, part #L-170440008-0001
- Molded to original airbox and duct dimensions
- Heat- and fuel-vapor-resistant materials
- Designed for dusty, muddy and wet riding
- Works with factory air filters and sensors
Materials and Construction
CFMoto intake parts use rigid, heat-stable plastics for airbox housings and lids, flexible rubber or TPE boots and ducts that seal against vibration, and filter media designed to trap fine dust while maintaining airflow.
Common Reasons Riders Replace This Part
- Replacing a cracked airbox, lid or intake boot
- Restoring the seal after water or mud intrusion
- Routine replacement of filters and wear items
- Fixing idle and performance problems from an air leak
Signs Your Intake Air Inlet Pipe Heat Insulator Needs Replacing
- Dust or dirt on the clean side of the air filter
- Cracks or splits in boots, ducts or the airbox
- Rough idle, hesitation or a lean condition
- Whistling or sucking noises from the intake
- Water in the airbox after a crossing
Installation Tips
- Check the CFMoto parts diagram for clamps, seals and duct routing.
- Remove the old part and clean any dust from the airbox and throttle body inlet.
- Install the new part, making sure every edge seals fully.
- Tighten clamps evenly. Do not overtighten plastic fittings.
- Start the engine and check for air leaks and a smooth idle.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #L-170440008-0001 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Intake Air Inlet Pipe Heat Insulator and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Intake Air Inlet Pipe Heat Insulator with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Intake Air Inlet Pipe Heat Insulator?
The genuine CFMoto part number is L-170440008-0001. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #L-170440008-0001 fit?
It fits the CForce 110 (2024).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
How often should I check my air filter?
Check it often, after every dusty ride if possible. Replace it at the interval in your CFMoto manual, or sooner in harsh conditions.
Can an intake leak damage my engine?
Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly. Fix intake leaks right away.
Will this change my machine's performance?
It restores factory airflow and sealing. If you had a leak, you may notice a smoother idle and better throttle response.
Order Your Genuine CFMoto Intake Air Inlet Pipe Heat Insulator Today
Get your CForce 110 back to factory condition. Add the genuine CFMoto Intake Air Inlet Pipe Heat Insulator (part #L-170440008-0001) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.