Intake Valve 36.5mm 420254421 by Can-Am

Genuine Can-Am Intake Valve 36.5mm — OEM Part #420254421

Rebuild with confidence. The genuine Can-Am Intake Valve 36.5mm is the factory engine part for your Can-Am ATV or side-by-side, machined to BRP's original specification for proper clearances, sealing and long service life.

Engine internals and castings work under heat, pressure and constant vibration. A part that is even slightly off can cause oil leaks, low compression, noise or major engine damage. This part is confirmed for 9 Can-Am models from 2022 to 2023. See the full fitment list below.

Intake Valve 36.5mm at a Glance

• OEM part number: 420254421
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Valves & Springs
• Fits: Commander crossover side-by-side, Defender utility side-by-side, Maverick sport side-by-side and Traxter utility side-by-side models, 2022–2023
• Condition: New

Can-Am Models and Years This Intake Valve 36.5mm Fits

Genuine Can-Am part #420254421 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Commander crossover side-by-side Fitment

Can-Am Defender utility side-by-side Fitment

Can-Am Maverick sport side-by-side Fitment

Can-Am Traxter utility side-by-side Fitment

Why Choose a Genuine Can-Am OEM Intake Valve 36.5mm?

• Factory tolerances for correct clearances and fit
• Designed to work with the other OEM parts in the Rotax engine
• Helps protect any applicable BRP warranty coverage
• Lowers the risk of a repeat teardown from a poor-fitting part
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM engine part, part #420254421
• Machined to BRP's original specifications
• Matches factory sealing surfaces and mounting points
• Made for the heat and loads of the listed engines
• Pairs with the gaskets and seals on the same parts diagram

Materials and Construction

Rotax engine parts use materials chosen for their location: aluminum alloy castings for cases, cylinders and covers; hardened, heat-treated steel for shafts, gears and valvetrain parts; and multi-layer or composite gaskets with elastomer oil seals.

Common Reasons Riders Replace This Part

• Full or partial engine rebuilds
• Repairs after overheating or oil starvation
• Fixing oil leaks at cases, covers and seals
• Restoring compression and power on a high-hour engine

Signs Your Intake Valve 36.5mm Needs Replacing

• Oil leaks around covers, cases or seals
• Ticking, knocking or rattling from the engine
• Low compression or noticeable power loss
• Blue or white smoke, or high oil use
• Metal debris in the oil or on the drain plug magnet

Installation Tips

1. Follow the BRP service manual for your model; engine work needs exact procedures and torque specs.
2. Clean all mating surfaces and replace any gaskets and seals you disturb.
3. Measure critical clearances with proper tools before final assembly.
4. Lubricate moving parts with clean engine oil or assembly lube as specified.
5. Torque fasteners in sequence, refill fluids and check for leaks.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #420254421 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2023 Can-Am Defender HD7 parts diagrams
• 2023 Can-Am Defender HD7 DPS parts diagrams
• 2023 Can-Am Defender MAX HD7 parts diagrams
• 2023 Can-Am Maverick Trail 700 parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Ball Bearing (#420932433)
• Can-Am Ball Bearing (#420932093)
• Can-Am Exhaust Camshaft (#420281579)
• Can-Am Camshaft Sprocket 38T (#420254446)
• Can-Am Chain Guide (#420251341)
• Can-Am Balance Shaft (#420637482)

Recommended Accessories and Maintenance Supplies

Pair your Intake Valve 36.5mm with these parts and supplies:

• Engine rebuild kits — Rebuild kits for UTV and ATV engines
• Engine gaskets and seals — Gaskets and seals for leak-free rebuilds
• Oil change kits — Oil change kits for after your rebuild
• Engine oil — Powersports oil for break-in and beyond
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Stop UTV Gasket Leaks: Expert Installation Guide
• UTV Valvetrain Noise: Symptoms & How to Fix Ticking
• How to Check UTV/ATV Engine Compression
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Intake Valve 36.5mm?

The genuine Can-Am part number is 420254421. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #420254421 fit?

It fits 9 Can-Am Commander, Defender, Maverick and Traxter models from 2022 to 2023. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Should I replace gaskets and seals at the same time?

Yes. Replace any gasket or seal you disturb. They are on the same Can-Am parts diagram.

Is OEM worth it over aftermarket engine parts?

For internals, OEM parts match the exact clearances the Rotax engine was designed around, which helps avoid noise, wear and leaks.

Can I do this repair myself?

Experienced home mechanics can do many engine repairs with the service manual and the right tools. Precision internal work is best left to a qualified technician if you are not set up for it.

Order Your Genuine Can-Am Intake Valve 36.5mm Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Intake Valve 36.5mm, OEM part #420254421, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Sand Flats Recreation Area — Moab, Utah: home of Hell's Revenge and other slickrock trails
• Sand Mountain Recreation Area — Fallon, Nevada: about 4,800 acres of dunes