Intermediate Hose 709200520 by Can-Am

Genuine Can-Am Intermediate Hose — OEM Part #709200520

Keep your Can-Am ATV or side-by-side running cool under load with a genuine Can-Am Intermediate Hose. It connects to the original hoses, mounts and wiring, so you get the factory cooling performance BRP engineered for hot days, slow crawling and heavy work.

The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 16 Can-Am models from 2014 to 2020. See the full fitment list below.

Intermediate Hose at a Glance

• OEM part number: 709200520
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Radiator Hose / Line
• Fits: Commander crossover side-by-side and Maverick sport side-by-side models, 2014–2020
• Condition: New

Can-Am Models and Years This Intermediate Hose Fits

Genuine Can-Am part #709200520 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Commander crossover side-by-side Fitment

Can-Am Maverick sport side-by-side Fitment

Why Choose a Genuine Can-Am OEM Intermediate Hose?

• Factory flow and capacity for your engine
• Direct-fit connections with no adapters
• Heat- and pressure-resistant construction
• Helps prevent overheating and head gasket failure
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM cooling part, part #709200520
• Original hose sizes, mounts and connectors
• Built for the pressure and temperature of the listed engines
• Designed for mud, dust and debris
• Works with BRP-approved coolant

Materials and Construction

Can-Am cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.

Common Reasons Riders Replace This Part

• Fixing coolant leaks and overheating
• Replacing parts damaged by mud packing or debris
• Preventive replacement of aging hoses and seals
• Restoring cooling after an engine rebuild

Signs Your Intermediate Hose Needs Replacing

• Temperature warning or rising gauge
• Coolant leaks or a sweet smell after riding
• A fan that does not run or makes noise
• Cracked, swollen or soft hoses
• Coolant bubbling or boiling over in the reservoir

Installation Tips

1. Let the engine cool completely before opening the system.
2. Drain coolant into a container and dispose of it properly.
3. Install the new part with fresh clamps, gaskets and O-rings where specified.
4. Refill with the coolant in your Can-Am manual and bleed air from the system.
5. Run to operating temperature, check for leaks and top up the reservoir.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #709200520 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2020 Can-Am Commander MAX 1000R EFI parts diagrams
• 2018 Can-Am Commander MAX 800R EFI parts diagrams
• 2018 Can-Am Maverick parts diagrams
• 2018 Can-Am Maverick MAX parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Coolant Tank Cap (#709200587)
• Can-Am Thermostat (#709200406)
• Can-Am Coolant Tank (#709200624)
• Can-Am Cooling Fan (#709200564)
• Can-Am Radiator (#709200395)
• Can-Am Radiator Grille Bracket (#705006635)

Recommended Accessories and Maintenance Supplies

Pair your Intermediate Hose with these parts and supplies:

• UTV cooling systems — Radiators, fans and cooling upgrades
• Coolant and antifreeze — Coolant for refilling after the repair
• Water pumps and rebuild kits — Pumps, kits and hardware
• Cooling fans — Radiator fans
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Upper Radiator Hose Hot, Lower Cold? UTV/ATV Fixes
• Signs Your UTV/ATV Thermostat is Bad & How to Test It
• Why Is My UTV Coolant Overflow Tank Boiling Over?
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Intermediate Hose?

The genuine Can-Am part number is 709200520. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #709200520 fit?

It fits 16 Can-Am Commander and Maverick models from 2014 to 2020. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

What coolant should I use?

Use the coolant type and mix in your Can-Am operator's guide. Mixing coolant types can cause gelling or corrosion.

Do I need to bleed the cooling system?

Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.

Why does my machine overheat in mud?

Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.

Order Your Genuine Can-Am Intermediate Hose Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Intermediate Hose, OEM part #709200520, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Hawk Pride Mountain Offroad — Tuscumbia, Alabama: about 1,000 acres of wooded trails
• Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas