Genuine Indian & Polaris Piston Ring Kit (Standard) — OEM Part #2206358
The Indian V-twin is the heart of every Indian. The genuine Indian & Polaris Piston Ring Kit (Standard) is built to the exact tolerances of the original part in your Indian Scout, so it fits the mating parts and keeps the engine running the way Indian designed it.
Engine internals, gaskets and covers work under heat, pressure and vibration. A part that is slightly off can cause oil leaks, noise or serious engine damage. Because Indian and Polaris are both Polaris Inc. brands, this part number is shared across Indian motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Piston Ring Kit (Standard) at a Glance
-
OEM part number: 2206358
-
Brand: Indian & Polaris (genuine Polaris-made OEM part)
-
Part type: Pistons & Components
-
Indian fitment: Scout, 2020–2024
-
Polaris off-road fitment: ACE, Farmhand, Ranger and Sportsman, 2017–2026
-
Condition: New
Models and Years This Piston Ring Kit (Standard) Fits
Genuine part #2206358 fits the models and years below, across Indian motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian Scout Bobber Sixty |
2020–2024 |
| Indian Scout Bobber Twenty |
2022 |
| Indian Scout Rogue Sixty |
2022–2024 |
| Indian Scout Sixty |
2020–2024 |
Polaris Off-Road Vehicle Fitment
20 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris ACE |
2018–2019 |
1 |
| Polaris Farmhand |
2017 |
1 |
| Polaris Ranger |
2017–2022 |
8 |
| Polaris Sportsman |
2018–2026 |
10 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Indian & Polaris OEM Piston Ring Kit (Standard)?
- Factory tolerances for correct clearances
- Designed to work with the other OEM parts in the Indian engine
- Correct sealing surfaces and gasket thickness
- Lowers the risk of a repeat teardown
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian & Polaris OEM engine part, part #2206358
- Machined to Indian's original specification
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the Indian V-twin
- Pairs with gaskets and seals on the same parts diagram
Materials and Construction
Indian engine parts use aluminum alloy castings for cases, cylinders and covers, heat-treated steel for cams, shafts and valvetrain parts, and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Top-end or full engine rebuilds
- Fixing oil leaks at covers, cases and seals
- Repairing cam chain tensioner or valvetrain wear
- Restoring compression and power on a high-mileage engine
Signs Your Piston Ring Kit (Standard) Needs Replacing
- Oil leaks at covers, base gaskets or seals
- Ticking, knocking or cam chain noise
- Low compression or power loss
- Blue smoke or high oil use
- Metal debris on the drain plug magnet
Installation Tips
- Follow the Indian service manual; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace every gasket and seal you disturb.
- Measure critical clearances before final assembly.
- Lubricate parts with clean engine oil or assembly lube.
- Torque in sequence, refill oil and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #2206358 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Piston Ring Kit (Standard) with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian & Polaris Piston Ring Kit (Standard)?
The genuine part number is 2206358. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #2206358 fit?
It fits the Indian Scout Bobber Sixty (2020–2024); Indian Scout Bobber Twenty (2022); Indian Scout Rogue Sixty (2022–2024); Indian Scout Sixty (2020–2024).
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 20 Polaris off-road models, including the ACE, Farmhand, Ranger and Sportsman. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian and Polaris models, not an aftermarket copy.
Should I replace gaskets at the same time?
Yes. Replace any gasket or seal you disturb; they are on the same parts diagram.
Are Indian engine parts still available?
Yes. Indian is still in production, and Witchdoctors stocks genuine engine parts for current and older models. Order wear items like gaskets and seals with the main part.
Can I do this myself?
Experienced home mechanics can with the service manual and the right tools. Internal work needing precise measurement is best done by a qualified technician.
Order Your Genuine Indian & Polaris Piston Ring Kit (Standard) Today
Keep your Indian motorcycle or Polaris off-road vehicle on the road. Add the genuine Indian & Polaris Piston Ring Kit (Standard) (part #2206358) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.