Genuine Yamaha Key Blank Cap — OEM Part #1XD-H2579-10-00
Electrical gremlins are some of the hardest problems to chase. The genuine Yamaha Key Blank Cap plugs into your Yamaha ATV or side-by-side with the original connectors, pin-outs and specifications, so it works with the factory wiring and electronics the first time.
Harnesses, switches, relays, sensors, charging parts, ignition parts and control units all work together. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 66 Yamaha models from 2022 to 2026. See the full fitment list below.
Key Blank Cap at a Glance
-
OEM part number: 1XD-H2579-10-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Key Blank
-
Fits: Viking utility side-by-side, Wolverine recreation side-by-side and YXZ pure-sport side-by-side models, 2022–2026
-
Condition: New
Yamaha Models and Years This Key Blank Cap Fits
Genuine Yamaha part #1XD-H2579-10-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 66 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Yamaha Viking utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Viking |
2022–2026 |
4 |
| Yamaha Viking VI |
2022–2025 |
5 |
Yamaha Wolverine recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Wolverine |
2022, 2024 |
4 |
| Yamaha Wolverine RMAX2 |
2022–2026 |
14 |
| Yamaha Wolverine RMAX4 |
2022–2026 |
13 |
| Yamaha Wolverine X2 |
2022–2026 |
14 |
| Yamaha Wolverine X4 |
2022–2026 |
8 |
Yamaha YXZ pure-sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha YXZ1000R |
2022–2025 |
4 |
Why Choose a Genuine Yamaha OEM Key Blank Cap?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU or CDI, meter and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM electrical part, part #1XD-H2579-10-00
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Yamaha models
- No splicing or adapters needed
Materials and Construction
Yamaha electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring meter functions and warning lights
Signs Your Key Blank Cap Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, meters or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Yamaha parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #1XD-H2579-10-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Key Blank Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Key Blank Cap?
The genuine Yamaha part number is 1XD-H2579-10-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #1XD-H2579-10-00 fit?
It fits 66 Yamaha Viking, Wolverine and YXZ models from 2022 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some control units may need dealer setup. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Yamaha Key Blank Cap Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Key Blank Cap (part #1XD-H2579-10-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.