Genuine Polaris Circuit Breaker 20-Amp — OEM Part #2200593
Electrical gremlins are some of the hardest problems to chase. The genuine Polaris Circuit Breaker 20-Amp plugs into your Polaris ATV or side-by-side with the original connectors, pin-outs and specifications, so it works with the factory wiring and electronics the first time.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 23 Polaris models from 1999 to 2006. See the full fitment list below.
Circuit Breaker 20-Amp at a Glance
-
OEM part number: 2200593
-
Brand: Polaris (genuine factory part)
-
Part type: Circuit Breaker
-
Fits: Polaris ATV, Magnum ATV, Ranger utility side-by-side, Series 10/11 ATV, Sportsman ATV and Trail Blazer ATV models, 1999–2006
-
Condition: New
Polaris Models and Years This Circuit Breaker 20-Amp Fits
Genuine Polaris part #2200593 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Polaris ATV Fitment
| Model |
Model Years |
| Polaris ATV PRO 500 4x4 |
2002 |
Polaris Magnum ATV Fitment
| Model |
Model Years |
| Polaris Magnum 330 2x4 |
2003, 2005 |
| Polaris Magnum 330 4x4 |
2003 |
| Polaris Magnum 500 4x4 Hds |
2003 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger |
1999 |
| Polaris Ranger 2x4 |
2004 |
| Polaris Ranger 4x4 |
2004 |
| Polaris Ranger 6x6 |
2004 |
| Polaris Ranger 500 Tm 2x4 |
2006 |
| Polaris Ranger Tm |
2004–2006 |
| Polaris Series 10 Ranger 500 4x4 |
2003 |
| Polaris Series 11 Ranger |
2003 |
Polaris Series 10/11 ATV Fitment
| Model |
Model Years |
| Polaris Series 10 Ptv 4x4 |
2003 |
| Polaris Series 11 UTV 2x4 |
2003 |
| Polaris Series 11 UTV 4x4 |
2003 |
| Polaris Series 11 UTV 6x6 |
2003 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 400 |
2003 |
| Polaris Sportsman 500 HO |
2003 |
| Polaris Sportsman 600 |
2003 |
| Polaris Sportsman 700 |
2003 |
Polaris Trail Blazer ATV Fitment
| Model |
Model Years |
| Polaris Trail Blazer |
2004 |
| Polaris Trail Blazer 250 |
2003 |
| Polaris Trail Blazer 400 |
2003 |
Why Choose a Genuine Polaris OEM Circuit Breaker 20-Amp?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #2200593
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Circuit Breaker 20-Amp Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Circuit Breaker 20-Amp with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Circuit Breaker 20-Amp?
The genuine Polaris part number is 2200593. Use it to match this part to your factory parts diagram.
Which Polaris models does part #2200593 fit?
It fits 23 Polaris ATV, Magnum, Ranger, Series, Sportsman and Trail Blazer models from 1999 to 2006. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris Circuit Breaker 20-Amp Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Circuit Breaker 20-Amp (part #2200593) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.