Genuine Polaris Kit Mount Shock Res. — OEM Part #2878887
Bring back the factory ride and handling with a genuine Polaris Kit Mount Shock Res.. Built for the Ranger 800 or Ranger XP, it keeps the original geometry, bushing fit and travel, so the machine tracks straight and soaks up the trail.
A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 2 Polaris models from 2012. See the full fitment list below.
Kit Mount Shock Res. at a Glance
-
OEM part number: 2878887
-
Brand: Polaris (genuine factory part)
-
Part type: Shock
-
Fits: Ranger utility side-by-side models, 2012
-
Condition: New
Polaris Models and Years This Kit Mount Shock Res. Fits
Genuine Polaris part #2878887 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 800 XP |
2012 |
| Polaris Ranger XP 800 |
2012 |
Why Choose a Genuine Polaris OEM Kit Mount Shock Res.?
- Factory geometry for straight tracking
- Correct bushing and ball joint fit
- Restores original ride height and travel
- Spreads loads across the frame as designed
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM suspension part, part #2878887
- Original mounting points and dimensions
- Corrosion-resistant coating where applicable
- Built for full-travel off-road use
- Works with factory bushings, ball joints and hardware
Materials and Construction
Polaris suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or nitrogen damping.
Common Reasons Riders Replace This Part
- Replacing bent arms, knuckles or links after an impact
- Fixing clunks and wandering from worn bushings
- Restoring ride height and damping
- Rebuilding the suspension on a high-hour machine
Signs Your Kit Mount Shock Res. Needs Replacing
- Clunking or knocking over bumps
- Wandering, pulling or loose handling
- Uneven or rapid tire wear
- Visible bends, cracks or leaking shocks
- Play in ball joints or bushings
Installation Tips
- Support the machine safely with the suspension unloaded.
- Check the Polaris parts diagram for bushings, ball joints and hardware.
- Remove the damaged part and inspect the frame mounts.
- Install, tightening pivot bolts at ride height if the manual specifies.
- Torque all hardware, set toe, and recheck after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Kit Mount Shock Res. with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Kit Mount Shock Res.?
The genuine Polaris part number is 2878887. Use it to match this part to your factory parts diagram.
Which Polaris models does part #2878887 fit?
It fits the Ranger 800 XP (2012); Ranger XP 800 (2012).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after replacing suspension parts?
Yes, check and set toe after installation.
Should I replace both sides?
For wear items like bushings and shocks, replace in pairs to keep handling balanced.
Is OEM better than aftermarket suspension?
OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.
Order Your Genuine Polaris Kit Mount Shock Res. Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Kit Mount Shock Res., OEM part #2878887, from Witchdoctors today and keep your Ranger 800 or Ranger XP running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.