Genuine Polaris Trim Panel, Right, Steely Blue — OEM Part #5454107-765
Keep your Ranger models working with a genuine Polaris Trim Panel, Right, Steely Blue. This OEM part is built to the original specification, so it works with the factory bed, rack or hitch without guesswork.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 44 Polaris models from 2019 to 2020. See the full fitment list below.
Trim Panel, Right, Steely Blue at a Glance
-
OEM part number: 5454107-765
-
Brand: Polaris (genuine factory part)
-
Part type: Cargo / Dump Box Panel
-
Position: Right
-
Color: Steely Blue
-
Fits: Ranger utility side-by-side models, 2019–2020
-
Condition: New
Polaris Models and Years This Trim Panel Fits
Genuine Polaris part #5454107-765 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 44 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2020 |
2 |
| Polaris Ranger 1000 |
2019–2020 |
6 |
| Polaris Ranger Back |
2020 |
2 |
| Polaris Ranger FC |
2020 |
2 |
| Polaris Ranger Northstar |
2019–2020 |
12 |
| Polaris Ranger RC |
2020 |
2 |
| Polaris Ranger Winter |
2020 |
2 |
| Polaris Ranger XP |
2019–2020 |
16 |
Why Choose a Genuine Polaris OEM Trim Panel?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #5454107-765
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and Lock & Ride accessories where equipped
Materials and Construction
Polaris cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Trim Panel Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Polaris parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5454107-765 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Trim Panel with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Trim Panel?
The genuine Polaris part number is 5454107-765. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5454107-765 fit?
It fits 44 Polaris Ranger models from 2019 to 2020. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by the manufacturer for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Polaris setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Polaris Trim Panel Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Trim Panel, Right, Steely Blue, OEM part #5454107-765, from Witchdoctors today and keep your Ranger models running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.