Genuine Can-Am Front Switch Housing, Left — OEM Part #710007301
Loose, heavy or wandering steering makes every ride tiring and less safe. The genuine Can-Am Front Switch Housing, Left restores precise, factory-feel steering on your Outlander models, fitting the original column, rack and linkage.
The steering wheel or handlebar, column, rack, tie rods and power steering unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 27 Can-Am models from 2023 to 2026. See the full fitment list below.
Front Switch Housing, Left at a Glance
-
OEM part number: 710007301
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Handlebar Control Switch
-
Position: Left
-
Fits: Outlander ATV models, 2023–2026
-
Condition: New
Can-Am Models and Years This Front Switch Housing Fits
Genuine Can-Am part #710007301 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander 4x4 X mr 1000R (Europe) |
2025–2026 |
| Can-Am Outlander 4x4 X mr 1000R (International) |
2025–2026 |
| Can-Am Outlander 4x4 XT 700 (International) |
2025 |
| Can-Am Outlander 4x4 XT 850 (International) |
2025–2026 |
| Can-Am Outlander 4x4 XT 1000R (International) |
2025–2026 |
| Can-Am Outlander 4x4 XT P 1000R (Europe) |
2025–2026 |
| Can-Am Outlander 700 4x4 XT |
2024–2026 |
| Can-Am Outlander 850 4x4 X mr |
2025–2026 |
| Can-Am Outlander 850 4x4 XT |
2025–2026 |
| Can-Am Outlander 1000R 4x4 Backcountry |
2026 |
| Can-Am Outlander 1000R 4x4 X mr |
2025–2026 |
| Can-Am Outlander 1000R 4x4 XT |
2025–2026 |
| Can-Am Outlander 1000R 4x4 XT P |
2025–2026 |
| Can-Am Outlander MAX 4x4 Backcountry (Europe) |
2026 |
| Can-Am Outlander MAX 4x4 XT 700 (Europe) |
2025–2026 |
| Can-Am Outlander MAX 4x4 XT 700 (International) |
2025–2026 |
| Can-Am Outlander MAX 4x4 XT 850 (Europe) |
2025–2026 |
| Can-Am Outlander MAX 4x4 XT 850 (International) |
2025–2026 |
| Can-Am Outlander MAX 4x4 XT P 1000R (Europe) |
2025–2026 |
| Can-Am Outlander MAX 4x4 XT P 1000R (International) |
2025–2026 |
| Can-Am Outlander MAX 700 4x4 XT |
2024–2026 |
| Can-Am Outlander MAX 850 4x4 XT |
2025–2026 |
| Can-Am Outlander MAX 1000R 4x4 Backcountry |
2026 |
| Can-Am Outlander MAX 1000R 4x4 XT |
2025–2026 |
| Can-Am Outlander MAX 1000R 4x4 XT P |
2025–2026 |
| Can-Am Outlander MAX XT 700 |
2023 |
| Can-Am Outlander XT 700 |
2023 |
Why Choose a Genuine Can-Am OEM Front Switch Housing?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Can-Am DPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM steering part, part #710007301
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Can-Am models
- Works with factory DPS units, sensors and wiring where applicable
Materials and Construction
Can-Am steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed DPS motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing DPS faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Front Switch Housing Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or a DPS warning
- Bent tie rods or an off-center wheel
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Can-Am parts diagram for hardware, cotter pins and DPS connectors.
- Disconnect the battery before working on DPS parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #710007301 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Switch Housing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Front Switch Housing?
The genuine Can-Am part number is 710007301. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #710007301 fit?
It fits 27 Can-Am Outlander models from 2023 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does DPS need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Can-Am Front Switch Housing Today
Get your Outlander models back to factory condition. Add the genuine Can-Am Front Switch Housing, Left (part #710007301) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.