Genuine Victory Turn Signal Left Side Rear Chrome — OEM Part #2410404
Be seen and stay road-legal with the genuine Victory Victory Turn Signal Left Side Rear Chrome, Polaris part #2410404. It is the factory lighting part for the Victory Kingpin.
Lighting keeps you seen and lets you see. Headlights, turn signals and brake lights must work and fit correctly to keep you safe and road-legal. This part is confirmed for 1 Victory model from 2004 to 2012. See the full fitment list below.
Availability note: Polaris lists this part as discontinued or no longer available. Stock may be limited. See what to do when a part is no longer available or browse hard-to-find Victory parts.
Victory Turn Signal Left Side Rear Chrome at a Glance
-
OEM part number: 2410404
-
Brand: Victory Motorcycles (genuine Polaris OEM part)
-
Part type: Turn Signal
-
Fits: Victory Cruiser models, 2004–2012
-
Condition: New
Victory Models and Years This Turn Signal Left Side Rear Chrome Fits
Genuine Victory part #2410404 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.
Victory Cruiser Fitment
| Model |
Model Years |
| Victory Kingpin |
2004–2012 |
Why Choose a Genuine Victory OEM Turn Signal Left Side Rear Chrome?
- Factory fit, beam pattern and brightness
- Plug-in connectors with no wire splicing
- DOT-compliant lighting for road use
- Matches the look of your other lights
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing
Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.
Features and Materials
Key Features
- Genuine Polaris/Victory OEM part #2410404
- Factory mounts and connectors
- Weather-sealed housing
- Direct replacement for the listed models
Materials and Construction
Victory lighting parts use polycarbonate lenses, chrome or painted housings, steel brackets and sealed electrical connectors.
Common Reasons Riders Replace This Part
- Replacing a broken lens or housing
- Fixing a dead turn signal or brake light
- Replacing lights after a tip-over
- Restoring stock lighting after a custom setup
Signs Your Turn Signal Left Side Rear Chrome Needs Replacing
- Cracked or foggy lenses
- Flickering or dead lights
- Water inside the housing
- Loose or broken mounts
Installation Tips
- Turn off the ignition and disconnect the battery.
- Remove the old part and note the wire routing.
- Apply dielectric grease to the connector and plug in the new part.
- Mount the part and tighten hardware evenly.
- Reconnect the battery and test all lights and signals.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Victory Parts Diagrams for This Part
Find part #2410404 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Victory OEM Parts
Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Turn Signal Left Side Rear Chrome with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory Turn Signal Left Side Rear Chrome?
The genuine Polaris/Victory part number is 2410404. Use it to match this part to your factory parts diagram.
Which Victory models does part #2410404 fit?
It fits the Kingpin (2004–2012).
Is this a genuine Victory part?
Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.
Can I still get parts for my Victory?
Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.
Will LED signals work with my Victory?
Some models need load equalizers or a module setting to prevent hyper-flash. OEM bulbs and lamps work with the factory system.
Is this light DOT compliant?
Genuine OEM lighting meets the factory standard for the listed models.
Do I need to aim my headlight?
Yes. Check the aim after replacing headlight parts.
Order Your Genuine Victory Turn Signal Left Side Rear Chrome Today
Ride with confidence on parts made for your bike. Order the genuine Victory Turn Signal Left Side Rear Chrome, OEM part #2410404, from Witchdoctors today and keep your Victory Kingpin running the way Victory designed it.
Where to Ride Your Victory
Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.