License Plate, Rear 9AWV-044023-8000 by CFMOTO

Genuine CFMoto License Plate, Rear — OEM Part #9AWV-044023-8000

Light up the trail again with a genuine CFMoto License Plate, Rear. Built for the CForce 800 or CForce 1000, it uses the factory mounts and connectors, so it installs cleanly and works with the original switches and wiring.

Headlights, tail lights, turn signals and switches let you see the trail and let others see you, and they matter for street-legal use where it is allowed. This part is confirmed for 2 CFMoto models from 2024 to 2025. See the full fitment list below.

License Plate, Rear at a Glance

• OEM part number: 9AWV-044023-8000
• Brand: CFMOTO (genuine factory part)
• Part type: License Plate Lights & Mounts
• Position: Rear
• Fits: CForce ATV models, 2024–2025
• Condition: New

CFMoto Models and Years This License Plate, Rear Fits

Genuine CFMoto part #9AWV-044023-8000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Why Choose a Genuine CFMoto OEM License Plate, Rear?

• Factory beam pattern and brightness
• Plug-and-play connectors with no splicing
• Sealed against water, dust and pressure washing
• Fits the original mounts and body openings
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM lighting part, part #9AWV-044023-8000
• Original connectors and mounting points
• Weather-sealed housing and lens where applicable
• Designed for the listed CFMoto models
• Works with factory switches and wiring

Materials and Construction

CFMoto lighting parts use impact-resistant polycarbonate lenses, sealed housings, LED or halogen light sources depending on the model, and weather-sealed connectors built for vibration and moisture.

Common Reasons Riders Replace This Part

• Replacing a cracked or fogged headlight or tail light
• Fixing lights that flicker or do not work
• Restoring turn signals and switches for street-legal setups
• Repairing lighting after trail damage

Signs Your License Plate, Rear Needs Replacing

• Lights that flicker, dim or do not work
• Cracked, fogged or water-filled lenses
• Broken mounting tabs
• Melted or corroded connectors
• A switch that no longer controls the light

Installation Tips

1. Disconnect the battery before working on lighting.
2. Remove the panels needed to reach the light using the CFMoto parts diagram.
3. Unplug the connector and remove the old part.
4. Install the new part, plug in fully and secure the mounting.
5. Test every function and aim the headlight if it is adjustable.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #9AWV-044023-8000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

• Rear Plastics diagram — 2025 CFMoto CForce 1000 Touring
• Rear Plastics diagram — 2025 CFMoto CForce 800 Touring

Other OEM Parts in This Assembly

Doing the job right? These genuine CFMoto parts are installed alongside the License Plate, Rear and are often replaced at the same time:

• CFMoto Rubber Collar (#0180-015003)
• CFMoto Self-Tapping Screw (#30110-420160070)
• CFMoto Nut Clip M6 (#8030-040800-00001)
• CFMoto Inner Hex Bolt M6X14 (#5BWV-040001-5000)
• CFMoto Bolt M6x16 (#30006-060016870)
• CFMoto Inner Hex Self-Tapping Screw St4.8X13 (#5BWV-040015-5000)

Recommended Accessories and Maintenance Supplies

Pair your License Plate, Rear with these parts and supplies:

• Headlights and brake lights — LED headlights and brake lights
• Light bulbs — Replacement bulbs and turn signal bulbs
• Turn signal kits — Kits for street-legal setups
• LED light bars — Extra lighting for night riding
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV Turn Signals Buyer’s Guide: Street Legal & Trail Safety
• Signs of a Bad UTV/ATV Lighting Module & Testing Guide
• UTV & ATV Lighting Buyer’s Guide: Choose the Best Setup
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto License Plate, Rear?

The genuine CFMoto part number is 9AWV-044023-8000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9AWV-044023-8000 fit?

It fits the CForce 800 Touring (2024–2025); CForce 1000 Touring (2024–2025).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Will this make my machine street legal?

It restores factory lighting. Street-legal rules vary by state and usually need more equipment, so check your local requirements.

Can I upgrade to aftermarket LEDs instead?

You can, but aftermarket lights may need adapters and can affect beam pattern. The OEM part plugs straight in.

Why does my light fill with water?

A cracked lens or damaged seal lets water in. Replacing the whole light is usually the best fix.

Order Your Genuine CFMoto License Plate, Rear Today

Ride with confidence on parts built for your machine. Order the genuine CFMoto License Plate, Rear, OEM part #9AWV-044023-8000, from Witchdoctors today and keep your CForce 800 or CForce 1000 running the way CFMoto designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Turkey Bay OHV Area at Land Between the Lakes — Golden Pond, Kentucky: about 100 miles of trails
• St. Anthony Sand Dunes — St. Anthony, Idaho: 10,600 acres of dunes