Genuine Can-Am LinQ Base Kit — OEM Part #715002350
Your machine earns its keep hauling gear, feed, firewood and tools. The genuine Can-Am LinQ Base Kit restores factory cargo and storage function on your Outlander models, fitting the original mounts so loads stay secure and latches work the way they should.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 84 Can-Am models from 2018 to 2026. See the full fitment list below.
LinQ Base Kit at a Glance
-
OEM part number: 715002350
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Cargo Box
-
Fits: Outlander ATV models, 2018–2026
-
Condition: New
Can-Am Models and Years This LinQ Base Kit Fits
Genuine Can-Am part #715002350 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 84 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander 2x4 |
2025–2026 |
1 |
| Can-Am Outlander 4x4 |
2025–2026 |
19 |
| Can-Am Outlander 6x6 |
2026 |
2 |
| Can-Am Outlander 450 |
2018–2023 |
4 |
| Can-Am Outlander 500 |
2023–2026 |
5 |
| Can-Am Outlander 570 |
2018–2023 |
6 |
| Can-Am Outlander 700 |
2023–2026 |
9 |
| Can-Am Outlander DPS |
2023 |
6 |
| Can-Am Outlander Ev |
2026 |
2 |
| Can-Am Outlander PRO |
2023–2026 |
27 |
| Can-Am Outlander X |
2023 |
1 |
| Can-Am Outlander XT |
2023 |
2 |
Why Choose a Genuine Can-Am OEM LinQ Base Kit?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM part, part #715002350
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and LinQ accessories where equipped
Materials and Construction
Can-Am cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your LinQ Base Kit Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Can-Am parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #715002350 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your LinQ Base Kit with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am LinQ Base Kit?
The genuine Can-Am part number is 715002350. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #715002350 fit?
It fits 84 Can-Am Outlander models from 2018 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by BRP for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Can-Am setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Can-Am LinQ Base Kit Today
Get your Outlander models back to factory condition. Add the genuine Can-Am LinQ Base Kit (part #715002350) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.