Genuine CFMoto Ignition Lock Kit — OEM Part #9CR6-010100-20000
Restore reliable power and electronics with a genuine CFMoto Ignition Lock Kit. Built for the CForce 500 or CForce 600, this OEM part matches the factory connectors and electrical values, so you do not have to splice wires or adapt plugs.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 2 CFMoto models from 2015 to 2019. See the full fitment list below.
Ignition Lock Kit at a Glance
-
OEM part number: 9CR6-010100-20000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Lock Kits
-
Fits: CForce ATV models, 2015–2019
-
Condition: New
CFMoto Models and Years This Ignition Lock Kit Fits
Genuine CFMoto part #9CR6-010100-20000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 500 HO |
2015–2018 |
| CFMoto CForce 600 |
2019 |
Why Choose a Genuine CFMoto OEM Ignition Lock Kit?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, dash and diagnostics
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM electrical part, part #9CR6-010100-20000
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed CFMoto models
- No splicing or adapters needed
Materials and Construction
CFMoto electrical parts use tinned copper conductors, weather-sealed connectors with silicone seals, heat- and abrasion-resistant insulation and loom, and potted or sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent electrical faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring dash functions and warning lights
Signs Your Ignition Lock Kit Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging or voltage problems
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable before working on electrical parts.
- Use the CFMoto parts diagram and wiring diagram to confirm routing and connectors.
- Inspect connectors for corrosion and clean them with electrical contact cleaner.
- Install the new part, making sure every connector clicks fully and seals.
- Route and secure wiring away from heat and moving parts, then test operation.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #9CR6-010100-20000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Ignition Lock Kit and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Ignition Lock Kit with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Ignition Lock Kit?
The genuine CFMoto part number is 9CR6-010100-20000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #9CR6-010100-20000 fit?
It fits the CForce 500 HO (2015–2018); CForce 600 (2019).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in electrical parts do not. Some control modules or keys may need dealer programming. Check your service manual or call us before ordering.
How can I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults come from a loose ground or corroded connector, not a failed part.
Should I use dielectric grease on connectors?
A light coat on connector seals can help keep water out. Follow your service manual for your specific connectors.
Order Your Genuine CFMoto Ignition Lock Kit Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Ignition Lock Kit, OEM part #9CR6-010100-20000, from Witchdoctors today and keep your CForce 500 or CForce 600 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.