Genuine Kawasaki Main Nozzle — OEM Part #49121-2185
Hard starts, stalling and hesitation often trace back to the fuel system. The genuine Kawasaki Main Nozzle restores factory fuel delivery on your Mule models, connecting to the original lines, fittings and wiring so it works with the factory fuel injection or carburetor setup.
Tanks, pumps, injectors, carburetors, lines and emissions parts must deliver clean fuel at the right pressure and keep vapors sealed. A small leak or weak part affects starting, power and safety. This part is confirmed for 3 Kawasaki models from 1992 to 2007. See the full fitment list below.
Main Nozzle at a Glance
-
OEM part number: 49121-2185
-
Brand: Kawasaki (genuine factory part)
-
Part type: Carburetors & Components
-
Fits: Mule utility side-by-side models, 1992–2007
-
Condition: New
Kawasaki Models and Years This Main Nozzle Fits
Genuine Kawasaki part #49121-2185 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 2500 |
1992–2005 |
| Kawasaki Mule 2510 |
1993–2002 |
| Kawasaki Mule 2520 |
1993 and earlier (1993–2000, 2007) |
Why Choose a Genuine Kawasaki OEM Main Nozzle?
- Correct fit with factory fittings and connectors
- Maintains the fuel delivery your engine is calibrated for
- Fuel- and ethanol-resistant materials
- Helps keep emissions and vapor systems compliant
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM fuel part, part #49121-2185
- Original line sizes, connectors, jets and mounting
- Built for gasoline and ethanol-blend exposure
- Designed for the listed Kawasaki models
- Works with factory fuel injection, carburetor and EVAP systems
Materials and Construction
Kawasaki fuel parts use ethanol-resistant hose and seals, polyethylene or steel tanks, corrosion-resistant pump, injector and carburetor parts, and fittings that seal under vibration.
Common Reasons Owners Replace This Part
- Fixing hard starting, stalling or hesitation
- Repairing fuel leaks or fuel smell
- Replacing parts damaged by stale or bad fuel
- Restoring emissions and EVAP parts
Signs Your Main Nozzle Needs Replacing
- Hard starting or long cranking
- Stalling, surging or hesitation under load
- Fuel smell or visible leaks
- Check engine light tied to fuel or EVAP (fuel-injected models)
- Cracked lines, fittings or tank parts
Installation Tips
- Work in a ventilated area away from sparks and relieve fuel pressure first on fuel-injected models.
- Disconnect the battery before working on pumps or wiring.
- Use the Kawasaki parts diagram to confirm routing, clamps and O-rings.
- Install with fresh seals and secure every clamp and connector.
- Check for leaks before starting the engine.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Main Nozzle with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Main Nozzle?
The genuine Kawasaki part number is 49121-2185. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #49121-2185 fit?
It fits the Mule 2500 (1992–2005); Mule 2510 (1993–2002); Mule 2520 (1993 and earlier (1993–2000, 2007)).
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Can ethanol fuel damage my fuel system?
Ethanol blends attract moisture and can degrade older parts, especially carburetors. Follow your owner's manual for recommended fuel.
Should I replace the fuel filter too?
If your model has a serviceable filter, replacing it during fuel work is a good idea.
Why does it run poorly after sitting?
Stale fuel can varnish carburetor jets, injectors and pumps. Use stabilizer for storage and drain old fuel.
About Availability of Part #49121-2185
This part is marked as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.