Genuine CFMoto Master Cylinder Rubber Sleeve — OEM Part #5ASV-803042-6000
Stop with confidence with a genuine CFMoto Master Cylinder Rubber Sleeve. Built for the UForce 600, this OEM brake part fits the factory calipers, lines and mounts, so pedal feel and stopping power return to the way CFMoto designed them.
Brake lines, calipers, master cylinders, pads, rotors and parking brakes work as a hydraulic and mechanical system. A leak, worn part or wrong fitting can lead to a soft pedal or brake failure. This part is confirmed for 1 CFMoto model from 2021 to 2025. See the full fitment list below.
Master Cylinder Rubber Sleeve at a Glance
-
OEM part number: 5ASV-803042-6000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Master Cylinders & Components
-
Fits: UForce utility UTV models, 2021–2025
-
Condition: New
CFMoto Models and Years This Master Cylinder Rubber Sleeve Fits
Genuine CFMoto part #5ASV-803042-6000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 600 |
2021–2025 |
Why Choose a Genuine CFMoto OEM Master Cylinder Rubber Sleeve?
- Factory hydraulic specification for proper pedal feel
- Direct fit with original calipers, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping power
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM brake part, part #5ASV-803042-6000
- Matches original fittings, banjo bolts and mounting points
- Built to CFMoto's brake system specification
- Designed for mud, water and steep terrain
- Works with DOT brake fluid as specified in your manual
Materials and Construction
CFMoto brake parts use reinforced rubber or braided brake hose, steel hard lines and fittings, aluminum caliper and master-cylinder bodies with rubber seals compatible with DOT fluid, and steel rotors and friction pads designed for off-road conditions.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking brake pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads and rotors
- Restoring a parking brake that will not hold
Signs Your Master Cylinder Rubber Sleeve Needs Replacing
- Spongy pedal or lever, or one that sinks to the floor
- Brake fluid leaks at lines, fittings or calipers
- Grinding, squealing or pulling to one side
- Scored, warped or thin rotors
- A parking brake that does not hold on a slope
Installation Tips
- Use the CFMoto parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from brake fluid and cap open lines to keep dirt out.
- Install the new part with new crush washers on banjo fittings and torque to spec.
- Refill with fresh DOT fluid of the type listed in your manual and bleed the system fully.
- Test pedal or lever firmness and brake function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5ASV-803042-6000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Master Cylinder Rubber Sleeve and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Master Cylinder Rubber Sleeve with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Master Cylinder Rubber Sleeve?
The genuine CFMoto part number is 5ASV-803042-6000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5ASV-803042-6000 fit?
It fits the UForce 600 (2021–2025).
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT fluid type specified in your CFMoto owner's manual or on the master-cylinder cap. Do not mix DOT 5 (silicone) with DOT 3, 4 or 5.1.
Do I need to bleed the brakes after replacing this part?
Yes, any time the hydraulic system is opened. Air in the lines causes a soft pedal or lever.
Should I replace rotors when I change pads?
Not always. Measure rotor thickness and check for scoring or warping. If it is below the minimum spec, replace it.
Order Your Genuine CFMoto Master Cylinder Rubber Sleeve Today
Ride with confidence on parts built for your machine. Order the genuine CFMoto Master Cylinder Rubber Sleeve, OEM part #5ASV-803042-6000, from Witchdoctors today and keep your UForce 600 running the way CFMoto designed it.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.