Genuine Can-Am Mounting Clamp — OEM Part #517308718
Your controls are how you talk to your machine. The genuine Can-Am Mounting Clamp restores factory feel and function on your Can-Am ATV or side-by-side, matching the original mounts, travel and connections.
Pedals, levers, cables, throttles and hand controls translate your input into action. Worn or sticky parts make the machine harder and less safe to operate. This part is confirmed for 130 Can-Am models from 2011 to 2025. See the full fitment list below.
Mounting Clamp at a Glance
-
OEM part number: 517308718
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Hand Guard
-
Fits: Outlander ATV and Renegade sport ATV models, 2011–2025
-
Condition: New
Can-Am Models and Years This Mounting Clamp Fits
Genuine Can-Am part #517308718 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 130 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Can-Am Outlander ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Outlander |
2012 |
1 |
| Can-Am Outlander 4x4 |
2018 |
7 |
| Can-Am Outlander 6x6 |
2014, 2019, 2021–2023, 2025 |
3 |
| Can-Am Outlander 450 |
2018–2023 |
5 |
| Can-Am Outlander 500 |
2011–2015 |
6 |
| Can-Am Outlander 570 |
2016–2023 |
14 |
| Can-Am Outlander 650 |
2011–2022 |
17 |
| Can-Am Outlander 800R |
2011–2015 |
13 |
| Can-Am Outlander 850 |
2016–2024 |
17 |
| Can-Am Outlander 1000 |
2013–2018, 2020 |
13 |
| Can-Am Outlander 1000R |
2016–2024 |
17 |
| Can-Am Outlander EFI |
2012, 2015, 2024 |
4 |
| Can-Am Outlander L |
2016–2017 |
5 |
| Can-Am Outlander PRO |
2016–2017 |
1 |
| Can-Am Outlander XT |
2012 |
1 |
Can-Am Renegade sport ATV Fitment
| Model Family |
Model Years |
Trims |
| Can-Am Renegade 500 |
2013, 2015 |
1 |
| Can-Am Renegade 800R |
2013, 2015 |
2 |
| Can-Am Renegade 1000 |
2013, 2015 |
3 |
Why Choose a Genuine Can-Am OEM Mounting Clamp?
- Factory feel, travel and return
- Direct fit with original brackets and connectors
- Built for mud, water and cold
- Restores safe, predictable control
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM control part, part #517308718
- Original mounting and adjustment
- Corrosion- and wear-resistant construction
- Designed for the listed Can-Am models
- Works with factory cables, sensors and switches
Materials and Construction
Can-Am control parts use steel or aluminum pedals and levers, lined and sealed cables, durable polymer bushings and grips, and sealed sensors for electronic throttles.
Common Reasons Riders Replace This Part
- Fixing sticky, binding or broken controls
- Replacing stretched or frayed cables
- Replacing bent or snapped levers and pedals
- Restoring throttle response and idle return
Signs Your Mounting Clamp Needs Replacing
- Throttle that sticks or will not return
- Stretched, frayed or binding cables
- Bent or broken levers and pedals
- Excess free play
- Warnings tied to the throttle sensor
Installation Tips
- Use the Can-Am parts diagram for routing, clips and adjusters.
- Route new cables exactly like the originals.
- Set free play to the service manual spec.
- Check full throttle return at full steering lock both ways.
- Test at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #517308718 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Mounting Clamp with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Mounting Clamp?
The genuine Can-Am part number is 517308718. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #517308718 fit?
It fits 130 Can-Am Outlander and Renegade models from 2011 to 2025. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
How do I adjust cable free play?
Use the adjuster at the lever, pedal or engine end and set it to the manual spec.
Why does my throttle stick?
Dirt in the cable, a kinked cable or a sticking throttle body. Replace damaged cables.
Are grips and hand guards model-specific?
Many are. Use the fitment table to confirm.
Order Your Genuine Can-Am Mounting Clamp Today
Get your Can-Am ATV or side-by-side back to factory condition. Add the genuine Can-Am Mounting Clamp (part #517308718) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.