Genuine Yamaha Muffler Gasket — OEM Part #2HC-14755-00-00
Keep heat and noise where they belong with a genuine Yamaha Muffler Gasket. Built for the Yamaha ATV or side-by-side, it bolts to the original mounts so the exhaust stays sealed, quiet and clear of plastics, wiring and riders.
The exhaust routes hot gas away from the engine, controls noise and keeps heat away from panels, wiring and riders. Loose shields and leaks lead to melted parts and failed inspections. This part is confirmed for 88 Yamaha models from 2016 to 2026. See the full fitment list below.
Muffler Gasket at a Glance
-
OEM part number: 2HC-14755-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Exhaust Gasket
-
Fits: Wolverine recreation side-by-side and YXZ pure-sport side-by-side models, 2016–2026
-
Condition: New
Yamaha Models and Years This Muffler Gasket Fits
Genuine Yamaha part #2HC-14755-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 88 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Yamaha Wolverine recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Wolverine |
2021–2022, 2024 |
8 |
| Yamaha Wolverine RMAX2 |
2021–2026 |
16 |
| Yamaha Wolverine RMAX4 |
2021–2026 |
15 |
| Yamaha Wolverine X2 |
2019–2026 |
18 |
| Yamaha Wolverine X4 |
2018–2026 |
15 |
Yamaha YXZ pure-sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha YXZ1000 |
2016 |
3 |
| Yamaha YXZ1000R |
2016–2025 |
13 |
Why Choose a Genuine Yamaha OEM Muffler Gasket?
- Factory fit and clearances
- Keeps noise at factory levels for trail rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM exhaust part, part #2HC-14755-00-00
- Original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed Yamaha engines
- Pairs with OEM gaskets and hardware on the same diagram
Materials and Construction
Yamaha exhaust parts are heat-resistant steel or stainless steel. Heat shields use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Muffler Gasket Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing from a leak
- Melted or discolored plastics near the exhaust
- Soot around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil, since exhaust bolts often seize.
- Replace gaskets at every joint you open.
- Fit with hardware loose, align for clearance, then tighten to spec.
- Run the engine and check for leaks, rattles and clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #2HC-14755-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Muffler Gasket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Muffler Gasket?
The genuine Yamaha part number is 2HC-14755-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #2HC-14755-00-00 fit?
It fits 88 Yamaha Wolverine and YXZ models from 2016 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails require a working, approved spark arrestor. Check local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need retuning. OEM keeps factory noise and performance.
Should I reuse exhaust gaskets?
No. They crush when tightened and rarely reseal.
Order Your Genuine Yamaha Muffler Gasket Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Muffler Gasket, OEM part #2HC-14755-00-00, from Witchdoctors today and keep your Yamaha ATV or side-by-side running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.