Genuine Kawasaki Needle Bearing, REVERSE GEAR — OEM Part #92046-1279
Grinding gears, popping out of range and vibration all point to the drivetrain. The genuine Kawasaki Needle Bearing, REVERSE GEAR restores factory shifting and power delivery on your Kawasaki ATV or side-by-side, built to the exact dimensions of the original so it meshes and mounts correctly.
The transmission, shift mechanism, gearcases and drive shafts carry the full torque of the engine. Worn or mismatched parts cause noise, hard shifting and expensive failures. This part is confirmed for 44 Kawasaki models from 2007 to 2027. See the full fitment list below.
Needle Bearing, REVERSE GEAR at a Glance
-
OEM part number: 92046-1279
-
Brand: Kawasaki (genuine factory part)
-
Part type: Gearcase Assembly
-
Note: REVERSE GEAR
-
Fits: Brute Force ATV, KFX sport and youth ATV, Mule utility side-by-side, Prairie utility ATV and Teryx recreation side-by-side models, 2007–2027
-
Condition: New
Kawasaki Models and Years This Needle Bearing Fits
Genuine Kawasaki part #92046-1279 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 44 Kawasaki model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Kawasaki Brute Force ATV Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Brute Force 650 |
2007–2013 |
4 |
| Kawasaki Brute Force 750 |
2007–2025 |
10 |
Kawasaki KFX sport and youth ATV Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki KFX 700 |
2007–2009 |
1 |
Kawasaki Mule utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Mule 600 |
2008–2016 |
1 |
| Kawasaki Mule 610 |
2008–2016 |
5 |
| Kawasaki Mule SX |
2017–2027 |
13 |
Kawasaki Prairie utility ATV Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Prairie 360 |
2007–2013 |
4 |
Kawasaki Teryx recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Teryx 750 |
2008–2013 |
6 |
Why Choose a Genuine Kawasaki OEM Needle Bearing?
- Exact gear, spline and bearing fit
- Restores smooth, positive shifting and range selection
- Designed for full engine torque and load
- Lowers the risk of repeat failures
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM drivetrain part, part #92046-1279
- Machined to Kawasaki's original specifications
- Hardened surfaces where applicable
- Matches factory seals, bearings and mounting
- Designed for the listed Kawasaki models
Materials and Construction
Kawasaki drivetrain parts use heat-treated alloy steel for gears, shafts, forks and splines, sealed bearings, and aluminum or cast housings, with oil- and weather-resistant seals and boots.
Common Reasons Owners Replace This Part
- Fixing grinding, popping out of gear or hard shifting
- Rebuilding transmissions and front or rear gearcases
- Fixing 4WD or differential-lock engagement problems
- Repairing leaks and vibration from drive shafts and U-joints
Signs Your Needle Bearing Needs Replacing
- Grinding, clunking or whining
- Popping out of gear or trouble selecting range
- Vibration that grows with speed
- Oil leaks at seals, covers or gearcases
- 4WD or diff lock that will not engage or release
Installation Tips
- Drain transmission or gearcase oil before disassembly.
- Follow the Kawasaki service manual for shimming, preload and torque specs.
- Replace seals, O-rings and gaskets you disturb.
- Lubricate gears and bearings with the specified oil during assembly.
- Refill with the correct oil and amount, then test-ride and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92046-1279 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Needle Bearing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Needle Bearing?
The genuine Kawasaki part number is 92046-1279. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92046-1279 fit?
It fits 44 Kawasaki Brute Force, KFX, Mule, Prairie and Teryx models from 2007 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
What oil should I use?
Use the transmission and gearcase oils in your Kawasaki owner's manual. The wrong oil can cause wear and engagement problems.
Should I replace bearings and seals during a rebuild?
Yes. They are inexpensive compared to labor.
Can a bad drivetrain part damage other components?
Yes. Worn parts shed metal into the oil and damage gears and bearings. Repair problems early.
Order Your Genuine Kawasaki Needle Bearing Today
Get your Kawasaki ATV or side-by-side back to factory condition. Add the genuine Kawasaki Needle Bearing, REVERSE GEAR (part #92046-1279) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network
-
The Mounds ORV Park — Mt. Morris, Michigan: a 370-acre park open year-round