Genuine Polaris Nut — OEM Part #7546701
Skip the hardware-store guesswork. The genuine Polaris Nut matches the thread pitch, length, strength grade and head style of the original, so it fits your Polaris ATV or side-by-side the first time and holds under vibration.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 104 Polaris models from 1999 to 2026. See the full fitment list below.
Nut at a Glance
-
OEM part number: 7546701
-
Brand: Polaris (genuine factory part)
-
Part type: OEM Nut
-
Fits: Polaris ATV, Ranger utility side-by-side, Scrambler ATV, Series 10/11 ATV, Sportsman ATV and Xpedition adventure side-by-side models, 1999–2026
-
Condition: New
Polaris Models and Years This Nut Fits
Genuine Polaris part #7546701 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 104 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Polaris ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris ATV PRO |
2002 |
1 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
1999, 2003 |
2 |
| Polaris Ranger 2x4 |
2004–2005 |
1 |
| Polaris Ranger 4x4 |
2004–2005, 2007 |
3 |
| Polaris Ranger 6x6 |
2004–2007 |
2 |
| Polaris Ranger 500 |
2003, 2006–2007 |
8 |
| Polaris Ranger 700 |
2002, 2006–2007 |
4 |
| Polaris Ranger 1000 |
2024–2026 |
11 |
| Polaris Ranger SP |
2026 |
1 |
| Polaris Ranger Tm |
2004–2006 |
1 |
| Polaris Ranger XP |
2005–2006, 2022–2023, 2026 |
14 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 850 |
2020–2026 |
1 |
| Polaris Scrambler 1000 |
2022–2025 |
2 |
| Polaris Scrambler XP |
2020–2025 |
2 |
Polaris Series 10/11 ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Series 10 |
2003 |
4 |
| Polaris Series 11 |
2003 |
3 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman 6x6 |
2003 |
1 |
| Polaris Sportsman 400 |
2003 |
1 |
| Polaris Sportsman 570 |
2021–2022, 2025–2026 |
5 |
| Polaris Sportsman 850 |
2014, 2020–2026 |
11 |
| Polaris Sportsman 1000 |
2023–2026 |
3 |
| Polaris Sportsman Touring |
2021–2026 |
5 |
| Polaris Sportsman XP |
2020–2026 |
13 |
Polaris Xpedition adventure side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Xpedition Adv |
2024–2026 |
2 |
| Polaris Xpedition XP |
2024–2026 |
2 |
| Polaris Xpedition Xp5 |
2024–2026 |
1 |
Why Choose a Genuine Polaris OEM Nut?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM hardware, part #7546701
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Polaris assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Polaris fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Nut Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Polaris parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7546701 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Nut with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Nut?
The genuine Polaris part number is 7546701. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7546701 fit?
It fits 104 Polaris ATV, Ranger, Scrambler, Series, Sportsman and Xpedition models from 1999 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Polaris Nut Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Nut, OEM part #7546701, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.