Genuine Polaris Nylok Nut — OEM Part #7542344
Small parts hold big things together. The genuine Polaris Nylok Nut is the exact factory fastener specified for your Polaris ATV or side-by-side, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 220 Polaris models from 2003 to 2026. See the full fitment list below.
Nylok Nut at a Glance
-
OEM part number: 7542344
-
Brand: Polaris (genuine factory part)
-
Part type: OEM Nut
-
Fits: ACE single-seat, Farmhand utility vehicle, Hawkeye ATV, low-speed vehicle, Ranger utility side-by-side, Scrambler ATV, Series 10/11 ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 2003–2026
-
Condition: New
Polaris Models and Years This Nylok Nut Fits
Genuine Polaris part #7542344 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 220 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE 325 |
2016 |
1 |
| Polaris ACE 500 |
2017–2019 |
1 |
| Polaris ACE 570 |
2016–2019 |
6 |
| Polaris ACE 900 |
2016 |
1 |
Polaris Farmhand utility vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris Farmhand HD |
2017 |
1 |
Polaris Hawkeye ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Hawkeye 325 |
2015 |
1 |
| Polaris Hawkeye 400 |
2011–2013 |
2 |
Polaris low-speed vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris LSV |
2011–2012 |
1 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2003, 2008–2009, 2015 |
3 |
| Polaris Ranger 2x4 |
2004–2005, 2008–2009 |
2 |
| Polaris Ranger 4x4 |
2004–2005, 2007–2008 |
3 |
| Polaris Ranger 6x6 |
2004–2009 |
2 |
| Polaris Ranger 48V |
2013, 2020–2022 |
3 |
| Polaris Ranger 400 |
2010–2014 |
5 |
| Polaris Ranger 500 |
2003, 2006–2008, 2011–2013, 2017–2022 |
21 |
| Polaris Ranger 570 |
2014–2025 |
25 |
| Polaris Ranger 700 |
2006–2009 |
5 |
| Polaris Ranger 800 |
2013–2014 |
2 |
| Polaris Ranger ETX |
2015–2016 |
1 |
| Polaris Ranger EV |
2010–2022 |
5 |
| Polaris Ranger Lsv |
2011–2012 |
1 |
| Polaris Ranger Tm |
2004–2006 |
1 |
| Polaris Ranger XP |
2005–2006 |
3 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 500 |
2010–2012 |
1 |
Polaris Series 10/11 ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Series 10 |
2003 |
2 |
| Polaris Series 11 |
2003 |
3 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015–2016 |
4 |
| Polaris Sportsman 400 |
2011–2014 |
2 |
| Polaris Sportsman 450 |
2016–2026 |
10 |
| Polaris Sportsman 500 |
2010–2013 |
3 |
| Polaris Sportsman 570 |
2014–2026 |
65 |
| Polaris Sportsman 800 |
2010–2014 |
4 |
| Polaris Sportsman ACE |
2014–2015 |
8 |
| Polaris Sportsman EFI |
2016–2017 |
1 |
| Polaris Sportsman ETX |
2015 |
2 |
| Polaris Sportsman Forest |
2011–2012 |
5 |
| Polaris Sportsman Touring |
2010–2024 |
10 |
| Polaris Sportsman X2 |
2019 |
1 |
Polaris Trail Blazer ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Blazer 330 |
2010–2013 |
1 |
Polaris Trail Boss ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Boss 330 |
2010–2013 |
2 |
Why Choose a Genuine Polaris OEM Nylok Nut?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM hardware, part #7542344
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Polaris assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Polaris fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Nylok Nut Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Polaris parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7542344 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Nylok Nut with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Nylok Nut?
The genuine Polaris part number is 7542344. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7542344 fit?
It fits 220 Polaris ACE, Farmhand, Hawkeye, LSV, Ranger, Scrambler, Series, Sportsman, Trail Blazer and Trail Boss models from 2003 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Polaris Nylok Nut Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Nylok Nut (part #7542344) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.