Genuine Indian & Polaris Nylok Nut — OEM Part #7546703
Small parts hold an Indian together. The genuine Indian & Polaris Nylok Nut is the exact factory fastener or fitting specified for your Indian Scout, with the correct size, thread, length, grade and finish.
OEM hardware is engineered for a specific location and load. The wrong grade, length or finish can strip threads, loosen with vibration or look out of place on a show-quality bike. Because Indian and Polaris are both Polaris Inc. brands, this part number is shared across Indian motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Nylok Nut at a Glance
-
OEM part number: 7546703
-
Brand: Indian & Polaris (genuine Polaris-made OEM part)
-
Part type: OEM Nut
-
Indian fitment: Scout, 2015–2016
-
Polaris off-road fitment: ACE, Farmhand, General, Ms, RZR, Ranger, Rgr, Scrambler, Sportsman and Xpedition, 2016–2026
-
Condition: New
Models and Years This Nylok Nut Fits
Genuine part #7546703 fits the models and years below, across Indian motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian Scout |
2015–2016 |
| Indian Scout Sixty |
2016 |
Polaris Off-Road Vehicle Fitment
610 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris ACE |
2017–2019 |
8 |
| Polaris Farmhand |
2017 |
1 |
| Polaris General |
2016–2026 |
55 |
| Polaris Ms |
2026 |
1 |
| Polaris RZR |
2019–2026 |
147 |
| Polaris Ranger |
2020–2026 |
181 |
| Polaris Rgr |
2026 |
2 |
| Polaris Scrambler |
2017–2026 |
14 |
| Polaris Sportsman |
2017–2026 |
191 |
| Polaris Xpedition |
2024–2025 |
10 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Indian & Polaris OEM Nylok Nut?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory chrome, black or plated finish
- No guessing at metric sizes
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian & Polaris OEM hardware, part #7546703
- Matches the original thread, length, head style and grade
- Corrosion-resistant finish
- Used across several Indian assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Indian fasteners are heat-treated alloy or carbon steel, or stainless steel where appearance and corrosion resistance matter, with chrome, black oxide or zinc finishes. Grommets, bushings and O-rings are rubber or polymer.
Common Reasons Riders Replace This Part
- Replacing hardware that vibrated loose
- Replacing stripped, rusted or rounded fasteners
- Rebuilds that call for new one-time-use hardware
- Replacing hardened grommets that cause rattles
Signs Your Nylok Nut Needs Replacing
- Rounded heads or damaged threads
- Rust or pitted chrome
- Missing hardware or rattling panels
- Cracked or hardened grommets
- Self-locking nuts that were already reused
Installation Tips
- Check the Indian parts diagram for the location and quantity.
- Clean threads in the mating part.
- Use thread locker only where the service manual specifies.
- Start fasteners by hand to avoid cross-threading.
- Torque to the factory spec.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #7546703 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Nylok Nut with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian & Polaris Nylok Nut?
The genuine part number is 7546703. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #7546703 fit?
It fits the Indian Scout (2015–2016); Indian Scout Sixty (2016).
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 610 Polaris off-road models, including the ACE, Farmhand, General, Ms, RZR and Ranger. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian and Polaris models, not an aftermarket copy.
Can I use a hardware-store bolt?
Grade, pitch, length and finish often differ. For brakes, suspension and engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the diagram for the quantity used.
Order Your Genuine Indian & Polaris Nylok Nut Today
Keep your Indian motorcycle or Polaris off-road vehicle on the road. Add the genuine Indian & Polaris Nylok Nut (part #7546703) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.
-
Trail Ridge Road — Rocky Mountain National Park, Colorado: tops out above 12,000 feet
-
Mohawk Trail — Massachusetts: a historic Berkshires route with hairpin views