Genuine Yamaha O-Ring — OEM Part #2MB-E3473-00-00
Small parts hold big things together. The genuine Yamaha O-Ring is the exact factory fastener specified for your Yamaha ATV or side-by-side, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 24 Yamaha models from 2016 to 2018. See the full fitment list below.
O-Ring at a Glance
-
OEM part number: 2MB-E3473-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: CVT/Clutch Components
-
Fits: Grizzly utility ATV, Kodiak utility ATV and Wolverine recreation side-by-side models, 2016–2018
-
Condition: New
Yamaha Models and Years This O-Ring Fits
Genuine Yamaha part #2MB-E3473-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Grizzly utility ATV Fitment
| Model |
Model Years |
| Yamaha Grizzly 700 |
2017 |
| Yamaha Grizzly 700 EPS |
2017–2018 |
| Yamaha Grizzly 700 EPS 4WD LE |
2017–2018 |
| Yamaha Grizzly 700 EPS 4WD SE |
2017–2018 |
| Yamaha Grizzly 700 EPS Hunting |
2017–2018 |
| Yamaha Grizzly 700 Hunting |
2017 |
Yamaha Kodiak utility ATV Fitment
| Model |
Model Years |
| Yamaha Kodiak 700 |
2018 |
| Yamaha Kodiak 700 4WD |
2017 |
| Yamaha Kodiak 700 4WD Hunting |
2017–2018 |
| Yamaha Kodiak 700 EPS |
2018 |
| Yamaha Kodiak 700 EPS 4WD |
2017 |
| Yamaha Kodiak 700 EPS 4WD Hunting |
2017 |
| Yamaha Kodiak 700 EPS 4WD S |
2017 |
| Yamaha Kodiak 700 EPS 4WD SE |
2017–2018 |
| Yamaha Kodiak 700 EPS Hunting |
2018 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine |
2017–2018 |
| Yamaha Wolverine EPS |
2017 |
| Yamaha Wolverine EPS Hunter |
2017 |
| Yamaha Wolverine Hunter |
2017 |
| Yamaha Wolverine R |
2016–2018 |
| Yamaha Wolverine R-Spec EPS |
2017–2018 |
| Yamaha Wolverine R-Spec EPS Hunter |
2017 |
| Yamaha Wolverine R-Spec EPS SE |
2017 |
| Yamaha Wolverine R-Spec Hunter |
2018 |
Why Choose a Genuine Yamaha OEM O-Ring?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM hardware, part #2MB-E3473-00-00
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Yamaha assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Yamaha fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your O-Ring Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Yamaha parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #2MB-E3473-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your O-Ring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha O-Ring?
The genuine Yamaha part number is 2MB-E3473-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #2MB-E3473-00-00 fit?
It fits 24 Yamaha Grizzly, Kodiak and Wolverine models from 2016 to 2018. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Yamaha O-Ring Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha O-Ring (part #2MB-E3473-00-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.