Genuine Can-Am Oil Dipstick — OEM Part #420256814
Protect your Rotax engine with a genuine Can-Am Oil Dipstick. It is built to the original specification for your Defender HD11 or Traxter HD11, so it seals correctly, holds pressure and routes oil the way BRP designed.
Oil pumps, lines, coolers, filters and dipsticks keep oil flowing, cool and clean. One leaking line or worn pump can starve bearings and destroy an engine quickly. This part is confirmed for 14 Can-Am models from 2026. See the full fitment list below.
Oil Dipstick at a Glance
-
OEM part number: 420256814
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Dipstick
-
Fits: Defender utility side-by-side and Traxter utility side-by-side models, 2026
-
Condition: New
Can-Am Models and Years This Oil Dipstick Fits
Genuine Can-Am part #420256814 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Defender utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Defender HD11 LTD Cab |
2026 |
| Can-Am Defender HD11 X mr |
2026 |
| Can-Am Defender HD11 XT |
2026 |
| Can-Am Defender HD11 XT Cab |
2026 |
| Can-Am Defender HD11 XU (International) |
2026 |
| Can-Am Defender MAX HD11 Lone Star |
2026 |
| Can-Am Defender MAX HD11 Lone Star Cab |
2026 |
| Can-Am Defender MAX HD11 LTD Cab |
2026 |
| Can-Am Defender MAX HD11 X mr |
2026 |
| Can-Am Defender MAX HD11 XT |
2026 |
| Can-Am Defender MAX HD11 XT Cab |
2026 |
Can-Am Traxter utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Traxter HD11 XT (Europe) |
2026 |
| Can-Am Traxter HD11 XU (International) |
2026 |
| Can-Am Traxter MAX HD11 XU (International) |
2026 |
Why Choose a Genuine Can-Am OEM Oil Dipstick?
- Correct fit and sealing with factory fittings
- Maintains designed oil pressure and flow
- Heat- and oil-resistant materials
- Protects expensive engine internals
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM part, part #420256814
- Original fittings, routing and mounting points
- Made for continuous exposure to hot oil
- Designed for the listed Rotax engines
- Pairs with OEM O-rings, gaskets and clamps on the same diagram
Materials and Construction
Can-Am oil-system parts combine aluminum and steel housings, reinforced hose rated for hot oil, and nitrile or fluoroelastomer O-rings and seals for long-term oil and heat exposure.
Common Reasons Riders Replace This Part
- Fixing oil leaks from lines, fittings or coolers
- Restoring oil pressure during a rebuild
- Routine replacement of wear items at service
- Repairing damage from a trail impact
Signs Your Oil Dipstick Needs Replacing
- Oil drips or residue around lines, fittings or the cooler
- Oil pressure warning or low readings
- Cracked, hardened or swollen hoses
- A damaged dipstick or tube
- Engine running hotter than normal
Installation Tips
- Drain the oil and let the engine cool first.
- Check the Can-Am parts diagram for routing and the O-rings or crush washers you need.
- Lubricate new O-rings with clean oil and torque fittings to spec without overtightening.
- Refill with the correct oil grade and quantity for your model.
- Run the engine, check for leaks, then recheck the oil level.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #420256814 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Oil Dipstick with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Oil Dipstick?
The genuine Can-Am part number is 420256814. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #420256814 fit?
It fits 14 Can-Am Defender and Traxter models from 2026 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Which oil should I use?
Use the oil type and quantity in your Can-Am operator's guide. An oil change kit makes sure you have the right filter and washer too.
Do I need new O-rings or crush washers?
Yes. Reused seals are a common cause of leaks.
How often should I change oil and filter?
Follow the intervals in your operator's guide, and change it sooner after dust, mud, water or heavy loads.
Order Your Genuine Can-Am Oil Dipstick Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Oil Dipstick, OEM part #420256814, from Witchdoctors today and keep your Defender HD11 or Traxter HD11 running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.