Genuine Yamaha Oil Hose — OEM Part #2HC-E3464-00-00
Protect your engine with a genuine Yamaha Oil Hose. It is built to the original specification for your Yamaha ATV or side-by-side, so it seals correctly, holds pressure and routes oil the way Yamaha designed.
Oil pumps, lines, coolers, filters and dipsticks keep oil flowing, cool and clean. One leaking line or worn pump can starve bearings and destroy an engine quickly. This part is confirmed for 88 Yamaha models from 2016 to 2026. See the full fitment list below.
Oil Hose at a Glance
-
OEM part number: 2HC-E3464-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Oil Line / Hose
-
Fits: Wolverine recreation side-by-side and YXZ pure-sport side-by-side models, 2016–2026
-
Condition: New
Yamaha Models and Years This Oil Hose Fits
Genuine Yamaha part #2HC-E3464-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 88 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Yamaha Wolverine recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Wolverine |
2021–2022, 2024 |
8 |
| Yamaha Wolverine RMAX2 |
2021–2026 |
16 |
| Yamaha Wolverine RMAX4 |
2021–2026 |
15 |
| Yamaha Wolverine X2 |
2019–2026 |
18 |
| Yamaha Wolverine X4 |
2018–2026 |
15 |
Yamaha YXZ pure-sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha YXZ1000 |
2016 |
3 |
| Yamaha YXZ1000R |
2016–2025 |
13 |
Why Choose a Genuine Yamaha OEM Oil Hose?
- Correct fit and sealing with factory fittings
- Maintains designed oil pressure and flow
- Heat- and oil-resistant materials
- Protects expensive engine internals
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM part, part #2HC-E3464-00-00
- Original fittings, routing and mounting points
- Made for continuous exposure to hot oil
- Designed for the listed Yamaha engines
- Pairs with OEM O-rings, gaskets and clamps on the same diagram
Materials and Construction
Yamaha oil-system parts combine aluminum and steel housings, reinforced hose rated for hot oil, and nitrile or fluoroelastomer O-rings and seals for long-term oil and heat exposure.
Common Reasons Riders Replace This Part
- Fixing oil leaks from lines, fittings or coolers
- Restoring oil pressure during a rebuild
- Routine replacement of wear items at service
- Repairing damage from a trail impact
Signs Your Oil Hose Needs Replacing
- Oil drips or residue around lines, fittings or the cooler
- Oil pressure warning or low readings
- Cracked, hardened or swollen hoses
- A damaged dipstick or tube
- Engine running hotter than normal
Installation Tips
- Drain the oil and let the engine cool first.
- Check the Yamaha parts diagram for routing and the O-rings or crush washers you need.
- Lubricate new O-rings with clean oil and torque fittings to spec without overtightening.
- Refill with the correct oil grade and quantity for your model.
- Run the engine, check for leaks, then recheck the oil level.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #2HC-E3464-00-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Oil Hose with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Oil Hose?
The genuine Yamaha part number is 2HC-E3464-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #2HC-E3464-00-00 fit?
It fits 88 Yamaha Wolverine and YXZ models from 2016 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Which oil should I use?
Use the oil type and quantity in your Yamaha owner's manual. An oil change kit makes sure you have the right filter and washer too.
Do I need new O-rings or crush washers?
Yes. Reused seals are a common cause of leaks.
How often should I change oil and filter?
Follow the intervals in your owner's manual, and change it sooner after dust, mud, water or heavy loads.
Order Your Genuine Yamaha Oil Hose Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Oil Hose, OEM part #2HC-E3464-00-00, from Witchdoctors today and keep your Yamaha ATV or side-by-side running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.