Genuine CFMoto Oil Pump Chain — OEM Part #0180-074000
Clean, steady oil flow is what keeps an engine alive. The genuine CFMoto Oil Pump Chain restores the factory lubrication system on your CFMoto ATV or UTV, fitting the original ports and mounts so oil goes exactly where it is needed.
Oil pumps, lines, coolers, filters and dipsticks keep oil flowing, cool and clean. One leaking line or worn pump can starve bearings and destroy an engine quickly. This part is confirmed for 11 CFMoto models from 2007 to 2016. See the full fitment list below.
Oil Pump Chain at a Glance
-
OEM part number: 0180-074000
-
Brand: CFMOTO (genuine factory part)
-
Part type: Oil Pump & Components
-
Fits: CForce ATV, UForce utility UTV and ZForce sport UTV models, 2007–2016
-
Condition: New
CFMoto Models and Years This Oil Pump Chain Fits
Genuine CFMoto part #0180-074000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 500 |
2008–2009 |
| CFMoto CForce 500 LWB |
2007–2008 |
| CFMoto CForce 500 SWB |
2007–2008, 2013–2016 |
| CFMoto CForce 500 X5 LWB |
2010–2012 |
| CFMoto CForce 500 X5 SWB |
2010–2012 |
| CFMoto CForce 600 LWB |
2013–2014 |
| CFMoto CForce 600 X6 LWB |
2010–2012 |
| CFMoto CForce 600 X6 SWB |
2010–2012 |
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 500 |
2008–2010 |
| CFMoto UForce 600 |
2011–2014 |
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 600 |
2012–2015 |
Why Choose a Genuine CFMoto OEM Oil Pump Chain?
- Correct fit and sealing with factory fittings
- Maintains designed oil pressure and flow
- Heat- and oil-resistant materials
- Protects expensive engine internals
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM part, part #0180-074000
- Matches original fittings, routing and mounting points
- Made for continuous exposure to hot engine oil
- Designed for the listed CFMoto engines
- Pairs with OEM gaskets, O-rings and clamps from the same diagram
Materials and Construction
CFMoto oil-system parts combine aluminum and steel housings, steel-braided or reinforced rubber hose rated for hot oil, and nitrile or fluoroelastomer O-rings and seals designed for long-term oil and heat exposure.
Common Reasons Riders Replace This Part
- Fixing oil leaks from lines, fittings or coolers
- Restoring oil pressure during a rebuild
- Routine replacement of wear items at service intervals
- Repairing damage from a trail impact
Signs Your Oil Pump Chain Needs Replacing
- Oil drips or residue around lines, fittings or the cooler
- Oil pressure warning light or low pressure readings
- Cracked, hardened or swollen hoses
- A damaged or bent dipstick or tube
- Engine running hotter than normal
Installation Tips
- Drain the oil and let the engine cool before opening the system.
- Check the CFMoto parts diagram for routing and the O-rings or crush washers you will need.
- Lubricate new O-rings with clean oil and torque fittings to spec. Do not overtighten.
- Refill with the correct oil grade and quantity for your model.
- Run the engine, check for leaks, then recheck the oil level.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #0180-074000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the Oil Pump Chain and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Oil Pump Chain with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto Oil Pump Chain?
The genuine CFMoto part number is 0180-074000. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #0180-074000 fit?
It fits 11 CFMoto CForce, UForce and ZForce models from 2007 to 2016. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Which oil should I use after the repair?
Use the oil grade and quantity listed in your CFMoto owner's manual. A complete oil change kit makes sure you have the correct filter and drain plug washer too.
Do I need new O-rings or crush washers?
Yes. Reusing old seals is a common cause of leaks. Replace any you disturb.
How often should I change my oil and filter?
Follow the service intervals in your owner's manual, and change it more often if you ride in dust, mud, water or heavy loads.
Order Your Genuine CFMoto Oil Pump Chain Today
Get your CFMoto ATV or UTV back to factory condition. Add the genuine CFMoto Oil Pump Chain (part #0180-074000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.