Genuine CFMoto CV Boot Kit, Outer/Fixed End — OEM Part #5HY0-2803A0
A clicking CV joint or torn boot will leave you stranded if you ignore it. The genuine CFMoto CV Boot Kit, Outer/Fixed End restores factory strength and articulation on your CFMoto ATV or UTV, with the original spline count, length and joint angles.
Axles, CV joints, bearings and hubs carry power to the wheels while the suspension cycles through its travel. They take constant shock loads, and any wear shows up as clicking, vibration or play. This part is confirmed for 13 CFMoto models from 2018 to 2025. See the full fitment list below.
CV Boot Kit, Outer/Fixed End at a Glance
-
OEM part number: 5HY0-2803A0
-
Brand: CFMOTO (genuine factory part)
-
Part type: CV Boot Kit
-
Position: Outer
-
Fits: CForce ATV, UForce utility UTV and ZForce sport UTV models, 2018–2025
-
Condition: New
CFMoto Models and Years This CV Boot Kit, Outer/Fixed End Fits
Genuine CFMoto part #5HY0-2803A0 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
CFMoto CForce ATV Fitment
| Model |
Model Years |
| CFMoto CForce 800 Touring |
2024–2025 |
| CFMoto CForce 800 XC |
2019–2024 |
| CFMoto CForce 1000 |
2023–2024 |
| CFMoto CForce 1000 Overland |
2021–2022, 2025 |
| CFMoto CForce 1000 Touring |
2024–2025 |
CFMoto UForce utility UTV Fitment
| Model |
Model Years |
| CFMoto UForce 1000 |
2019–2025 |
| CFMoto UForce 1000 XL |
2022–2025 |
CFMoto ZForce sport UTV Fitment
| Model |
Model Years |
| CFMoto ZForce 950 EX |
2022 |
| CFMoto ZForce 950 HO EX |
2022–2024 |
| CFMoto ZForce 950 HO Sport |
2022–2023 |
| CFMoto ZForce 950 Sport |
2020–2025 |
| CFMoto ZForce 950 Sport 4 |
2024–2025 |
| CFMoto ZForce 1000 |
2018–2019 |
Why Choose a Genuine CFMoto OEM CV Boot Kit, Outer/Fixed End?
- Exact spline count and length for a direct fit
- Factory CV joint angles for full suspension travel
- Designed for the torque of the listed engines
- Sealed boots and bearings to keep out water and grit
- Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing
Features and Materials
Key Features
- Genuine CFMoto OEM axle or hub part, part #5HY0-2803A0
- Matches original spline, length and bearing dimensions
- Heat-treated shafts and joints where applicable
- Boots and seals designed for mud and water
- Fits the listed CFMoto models without modification
Materials and Construction
CFMoto axles use heat-treated alloy steel shafts and CV joints packed with high-temperature grease and sealed with thermoplastic or rubber boots. Hubs and bearings use hardened steel races and seals designed for water crossings and mud.
Common Reasons Riders Replace This Part
- Replacing an axle with a clicking or broken CV joint
- Fixing torn boots before dirt ruins the joint
- Replacing worn wheel bearings and hubs
- Repairs after a hard impact or broken axle
Signs Your CV Boot Kit, Outer/Fixed End Needs Replacing
- Clicking or popping when turning under power
- Torn or leaking CV boots with grease slung around the wheel
- Vibration at speed or under acceleration
- Play or grinding in the wheel bearing
- A broken axle or wheel that will not drive
Installation Tips
- Raise and support the machine safely and remove the wheel.
- Remove the axle nut. Many CFMoto axle nuts are single-use, so replace it.
- Separate the suspension as needed to remove the old axle, keeping the boot off sharp edges.
- Install the new part, making sure the splines fully seat and the circlip engages.
- Torque the axle nut and suspension hardware to spec, then reinstall the wheel and test-ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
CFMoto Parts Diagrams for This Part
Part #5HY0-2803A0 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:
Other OEM Parts in This Assembly
Doing the job right? These genuine CFMoto parts are installed alongside the CV Boot Kit, Outer/Fixed End and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your CV Boot Kit, Outer/Fixed End with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this CFMoto CV Boot Kit, Outer/Fixed End?
The genuine CFMoto part number is 5HY0-2803A0. Use it to match this part to your factory parts diagram.
Which CFMoto models does part #5HY0-2803A0 fit?
It fits 13 CFMoto CForce, UForce and ZForce models from 2018 to 2025. The complete list is in the fitment tables above.
Is this a genuine CFMoto part?
Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.
Do I need a new axle nut?
Many CFMoto axle nuts are designed for one use. Check the parts diagram and replace the nut and cotter pin if specified.
Can I replace just the CV boot?
If the joint is not clicking and the grease is clean, a boot kit can work. If dirt or water got in, replacing the axle is usually the better choice.
Is OEM as strong as a heavy-duty aftermarket axle?
It is built to CFMoto's factory standard for stock machines. If you run much larger tires or a lift, a heavy-duty axle may be worth considering.
Order Your Genuine CFMoto CV Boot Kit, Outer/Fixed End Today
Get your CFMoto ATV or UTV back to factory condition. Add the genuine CFMoto CV Boot Kit, Outer/Fixed End (part #5HY0-2803A0) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your CFMoto
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.