Genuine Can-Am Outlet Hose — OEM Part #709200801
Overheating can end a ride and ruin an engine. The genuine Can-Am Outlet Hose restores factory cooling performance on your Outlander models, with the exact fit, connections and flow the system was designed around.
The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 10 Can-Am models from 2017 to 2024. See the full fitment list below.
Outlet Hose at a Glance
-
OEM part number: 709200801
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Radiator Hose / Line
-
Fits: Outlander ATV models, 2017–2024
-
Condition: New
Can-Am Models and Years This Outlet Hose Fits
Genuine Can-Am part #709200801 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Outlander ATV Fitment
| Model |
Model Years |
| Can-Am Outlander 650 EFI X mr |
2017 |
| Can-Am Outlander 850 4x4 X mr EFI |
2018 |
| Can-Am Outlander 850 EFI |
2019 |
| Can-Am Outlander 850 EFI 4x4 X mr |
2024 |
| Can-Am Outlander 850 EFI X mr |
2017, 2020–2023 |
| Can-Am Outlander 1000R EFI |
2019 |
| Can-Am Outlander 1000R EFI 4x4 X mr |
2024 |
| Can-Am Outlander 1000R EFI X mr |
2017, 2020–2023 |
| Can-Am Outlander MAX 4x4 X mr 1000R (International) |
2018 |
| Can-Am Outlander MAX 1000R 4x4 X mr |
2018 |
Why Choose a Genuine Can-Am OEM Outlet Hose?
- Factory flow and capacity for your engine
- Direct-fit connections with no adapters
- Heat- and pressure-resistant construction
- Helps prevent overheating and head gasket failure
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM cooling part, part #709200801
- Original hose sizes, mounts and connectors
- Built for the pressure and temperature of the listed engines
- Designed for mud, dust and debris
- Works with BRP-approved coolant
Materials and Construction
Can-Am cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.
Common Reasons Riders Replace This Part
- Fixing coolant leaks and overheating
- Replacing parts damaged by mud packing or debris
- Preventive replacement of aging hoses and seals
- Restoring cooling after an engine rebuild
Signs Your Outlet Hose Needs Replacing
- Temperature warning or rising gauge
- Coolant leaks or a sweet smell after riding
- A fan that does not run or makes noise
- Cracked, swollen or soft hoses
- Coolant bubbling or boiling over in the reservoir
Installation Tips
- Let the engine cool completely before opening the system.
- Drain coolant into a container and dispose of it properly.
- Install the new part with fresh clamps, gaskets and O-rings where specified.
- Refill with the coolant in your Can-Am manual and bleed air from the system.
- Run to operating temperature, check for leaks and top up the reservoir.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #709200801 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Outlet Hose with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Outlet Hose?
The genuine Can-Am part number is 709200801. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #709200801 fit?
It fits 10 Can-Am Outlander models from 2017 to 2024. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
What coolant should I use?
Use the coolant type and mix in your Can-Am operator's guide. Mixing coolant types can cause gelling or corrosion.
Do I need to bleed the cooling system?
Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.
Why does my machine overheat in mud?
Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.
Order Your Genuine Can-Am Outlet Hose Today
Get your Outlander models back to factory condition. Add the genuine Can-Am Outlet Hose (part #709200801) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.