Output Shaft Nut Washer, Rear 0180-060001-0050 by CFMOTO

Genuine CFMoto Output Shaft Nut Washer, Rear — OEM Part #0180-060001-0050

Grinding gears, popping out of range and vibration all point to the drivetrain. The genuine CFMoto Output Shaft Nut Washer, Rear restores factory shifting and power delivery on your CFMoto ATV or UTV, built to the exact dimensions of the original so it meshes and mounts correctly.

The transmission, shift mechanism, differentials and drive shafts carry the full torque of the engine. Worn or mismatched parts lead to noise, hard shifting and expensive failures. This part is confirmed for 3 CFMoto models from 2008 to 2015. See the full fitment list below.

Output Shaft Nut Washer, Rear at a Glance

• OEM part number: 0180-060001-0050
• Brand: CFMOTO (genuine factory part)
• Part type: Transmission Components
• Position: Rear
• Fits: UForce utility UTV and ZForce sport UTV models, 2008–2015
• Condition: New

CFMoto Models and Years This Output Shaft Nut Washer, Rear Fits

Genuine CFMoto part #0180-060001-0050 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto UForce utility UTV Fitment

CFMoto ZForce sport UTV Fitment

Why Choose a Genuine CFMoto OEM Output Shaft Nut Washer, Rear?

• Exact gear, spline and bearing fit
• Restores smooth, positive shifting and range selection
• Designed for full engine torque and load
• Lowers the risk of repeat failures from a poor-fitting part
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM drivetrain part, part #0180-060001-0050
• Machined to original CFMoto specifications
• Hardened surfaces for wear resistance where applicable
• Matches factory seals, bearings and mounting
• Designed for the listed CFMoto models

Materials and Construction

CFMoto drivetrain parts use heat-treated alloy steel for gears, shafts, shift forks and splines, sealed bearings, and aluminum or cast housings. Seals and boots are made from oil- and weather-resistant elastomers.

Common Reasons Riders Replace This Part

• Fixing grinding, popping out of gear or hard shifting
• Rebuilding transmissions, gearcases and differentials
• Fixing 4WD engagement problems
• Repairing leaks and vibration from drive shafts and U-joints

Signs Your Output Shaft Nut Washer, Rear Needs Replacing

• Grinding, clunking or whining noises
• Popping out of gear or difficulty selecting range
• Vibration that increases with speed
• Oil leaks at seals, covers or the differential
• 4WD that will not engage or disengage

Installation Tips

1. Drain the transmission or differential fluid before disassembly.
2. Follow the CFMoto service manual. Many drivetrain jobs need exact shimming, preload and torque specs.
3. Replace seals, O-rings and gaskets you disturb.
4. Lubricate gears and bearings with the specified fluid during assembly.
5. Refill with the correct fluid type and amount, then test-ride and check for leaks.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Output Shaft Nut Washer, Rear with these parts and supplies:

• Transmission parts and fluid — Transmission components and fluids
• Differential parts — Differential gears, bearings and seals
• Drive and propeller shafts — Prop shafts and U-joints
• Transmission oil — Gear oil for refilling after service
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Stuck ATV/UTV Gear Shifter? How to Fix It Fast
• Fix UTV & ATV Gearcase Grinding: Popping Out of Gear
• Bad UTV Propeller Drive Shaft Symptoms: Fix Floorboard Shaking
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Output Shaft Nut Washer, Rear?

The genuine CFMoto part number is 0180-060001-0050. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #0180-060001-0050 fit?

It fits the UForce 500 (2008–2010); UForce 600 (2011–2014); ZForce 600 (2012–2015).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

What fluid should I use after the repair?

Use the transmission and differential fluids listed in your CFMoto owner's manual. The wrong fluid can cause wear and engagement problems.

Should I replace bearings and seals during a rebuild?

Yes. Bearings and seals are inexpensive compared to labor. Replace them while the unit is apart.

Can a bad drivetrain part damage other components?

Yes. A worn part can send metal debris through the fluid and damage gears and bearings. Repair problems early.

About Availability of Part #0180-060001-0050

CFMoto has marked this part as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Georgia Offroad Adventures — Union Point, Georgia: about 150 miles of signed trails
• Silver Lake State Park ORV Area — Mears, Michigan: 450 acres of open sand dunes on Lake Michigan