Parking Brake Caliper 9030-080300 by CFMOTO

Genuine CFMoto Parking Brake Caliper — OEM Part #9030-080300

Stop with confidence with a genuine CFMoto Parking Brake Caliper. Built for the UForce 500 or UForce 600, this OEM brake part fits the factory calipers, lines and mounts, so pedal feel and stopping power return to the way CFMoto designed them.

Brake lines, calipers, master cylinders, pads, rotors and parking brakes work as a hydraulic and mechanical system. A leak, worn part or wrong fitting can lead to a soft pedal or brake failure. This part is confirmed for 2 CFMoto models from 2008 to 2014. See the full fitment list below.

Parking Brake Caliper at a Glance

• OEM part number: 9030-080300
• Brand: CFMOTO (genuine factory part)
• Part type: Brake Calipers & Components
• Fits: UForce utility UTV models, 2008–2014
• Condition: New

CFMoto Models and Years This Parking Brake Caliper Fits

Genuine CFMoto part #9030-080300 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto UForce utility UTV Fitment

Why Choose a Genuine CFMoto OEM Parking Brake Caliper?

• Factory hydraulic specification for proper pedal feel
• Direct fit with original calipers, lines and mounts
• Built for the heat and contamination of off-road braking
• Restores safe, predictable stopping power
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM brake part, part #9030-080300
• Matches original fittings, banjo bolts and mounting points
• Built to CFMoto's brake system specification
• Designed for mud, water and steep terrain
• Works with DOT brake fluid as specified in your manual

Materials and Construction

CFMoto brake parts use reinforced rubber or braided brake hose, steel hard lines and fittings, aluminum caliper and master-cylinder bodies with rubber seals compatible with DOT fluid, and steel rotors and friction pads designed for off-road conditions.

Common Reasons Riders Replace This Part

• Fixing a soft, spongy or sinking brake pedal
• Replacing leaking lines, calipers or master cylinders
• Replacing worn pads and rotors
• Restoring a parking brake that will not hold

Signs Your Parking Brake Caliper Needs Replacing

• Spongy pedal or lever, or one that sinks to the floor
• Brake fluid leaks at lines, fittings or calipers
• Grinding, squealing or pulling to one side
• Scored, warped or thin rotors
• A parking brake that does not hold on a slope

Installation Tips

1. Use the CFMoto parts diagram to confirm fittings, crush washers and routing.
2. Protect painted surfaces from brake fluid and cap open lines to keep dirt out.
3. Install the new part with new crush washers on banjo fittings and torque to spec.
4. Refill with fresh DOT fluid of the type listed in your manual and bleed the system fully.
5. Test pedal or lever firmness and brake function at low speed before riding normally.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Parking Brake Caliper with these parts and supplies:

• UTV brake pads and rotors — Pads, rotors and parking brake parts
• UTV brake lines — Replacement and braided brake lines
• EBC brakes — EBC pads and rotors for UTVs and ATVs
• Brake cleaner and penetrating oil — Cleaners for brake service
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Spongy Brakes? Signs Your UTV Brake Pads Need Replacing
• Do You Need to Change Rotors with Brake Pads on a UTV?
• Do Braided Brake Lines Firm Up a UTV or ATV Pedal?
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Parking Brake Caliper?

The genuine CFMoto part number is 9030-080300. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9030-080300 fit?

It fits the UForce 500 (2008–2010); UForce 600 (2011–2014).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

What brake fluid should I use?

Use the DOT fluid type specified in your CFMoto owner's manual or on the master-cylinder cap. Do not mix DOT 5 (silicone) with DOT 3, 4 or 5.1.

Do I need to bleed the brakes after replacing this part?

Yes, any time the hydraulic system is opened. Air in the lines causes a soft pedal or lever.

Should I replace rotors when I change pads?

Not always. Measure rotor thickness and check for scoring or warping. If it is below the minimum spec, replace it.

About Availability of Part #9030-080300

CFMoto has marked this part as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Silver Lake State Park ORV Area — Mears, Michigan: 450 acres of open sand dunes on Lake Michigan
• Burning Rock Offroad Park — Tams, West Virginia: 100 miles of trails (UTVs up to 64 in. wide)