Parking Light Decal 704906417 by Can-Am

Genuine Can-Am Parking Light Decal — OEM Part #704906417

Restore the showroom look of your Can-Am ATV or side-by-side with the genuine Can-Am Parking Light Decal. It is the same factory graphic BRP applies on the assembly line, so the colors, cut lines and logos line up with the rest of your machine instead of standing out as a replacement.

Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that must stay legible. This part is confirmed for 47 Can-Am models from 2017 to 2026. See the full fitment list below.

Parking Light Decal at a Glance

• OEM part number: 704906417
• Brand: Can-Am by BRP (genuine factory part)
• Part type: OEM Decal
• Fits: Defender utility side-by-side and Traxter utility side-by-side models, 2017–2026
• Condition: New

Can-Am Models and Years This Parking Light Decal Fits

Genuine Can-Am part #704906417 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

This part is shared across 47 Can-Am model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.

Can-Am Defender utility side-by-side Fitment

Can-Am Traxter utility side-by-side Fitment

Why Choose a Genuine Can-Am OEM Parking Light Decal?

• Exact factory color match, so it blends with the graphics around it
• Pre-cut to the original outline, with no trimming
• Correct placement for the specific panel it was designed for
• Keeps your machine looking original, which helps at resale or trade-in
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM graphic, part #704906417
• UV-resistant inks made for outdoor powersports use
• Pressure-sensitive adhesive backing for a clean, bubble-free bond
• Sized and shaped for the original panel location
• Ready to apply. No paint, primer or special tools needed

Materials and Construction

Can-Am factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic panels through heat cycles and vibration.

Common Reasons Riders Replace This Part

• Replacing graphics scratched or peeled by brush and roost
• Refreshing a machine before selling or trading it in
• Finishing a body panel replacement so it matches
• Replacing illegible safety or warning labels

Signs Your Parking Light Decal Needs Replacing

• Edges lifting or peeling away from the panel
• Colors faded or chalky from sun exposure
• Tears, scuffs or missing sections
• A new panel installed without its matching graphic
• Warning information you can no longer read

Installation Tips

1. Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
2. Clean off leftover adhesive, then wipe the area with isopropyl alcohol.
3. Let the surface dry and work at room temperature (roughly 60–90°F).
4. Peel back a small section of backing, align one edge, and press outward with a squeegee.
5. Work across the decal to push out air, press the edges firmly and avoid pressure washing for 24–48 hours.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #704906417 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2017 Can-Am Defender HD10 parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Operating Guide Warning Label (#704907947)
• Can-Am Operating Guide Warning Label (#704908093)
• Can-Am Reflector, Red (#705016982)
• Can-Am Roll Over Warning Label (#704907690)
• Can-Am Dashboard Warning Label (#704908893)
• Can-Am Passenger Warning Label (#704907951)

Recommended Accessories and Maintenance Supplies

Pair your Parking Light Decal with these parts and supplies:

• UTV and ATV graphics kits — Full kits to refresh or customize your machine
• UTV and ATV reflectors — Replacement reflectors for visibility
• Off-road cleaning kits — Cleaning kits that are safe on graphics
• UTV waxes and protectants — Protectants that help graphics resist UV fade
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV Decals & Graphics: Ultimate Side-by-Side Buyer's Guide
• A Guide to UTV/ATV Warning Labels & Safety Decals
• How to Clean UTV & ATV Vinyl Seats to Prevent Cracking
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Parking Light Decal?

The genuine Can-Am part number is 704906417. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #704906417 fit?

It fits 47 Can-Am Defender and Traxter models from 2017 to 2026. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Will this decal match my other graphics?

Yes. It is the genuine Can-Am graphic for the listed models and years. Graphics on older machines may have faded slightly, so a new decal can look brighter at first.

Do I need to remove the panel to install it?

Usually not. Removing the panel can make cleaning and alignment easier on tight curves.

Can I apply it in cold weather?

For the best bond, apply it at room temperature. Warm the panel first if you are working in a cold garage.

Order Your Genuine Can-Am Parking Light Decal Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Parking Light Decal, OEM part #704906417, from Witchdoctors today and keep your Can-Am ATV or side-by-side running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Mine Made Paradise Adventure Park — Leburn, Kentucky: 100+ miles of ATV and UTV trails (UTVs up to 70 in. wide)
• Sand Flats Recreation Area — Moab, Utah: home of Hell's Revenge and other slickrock trails