Parking Switch 8010-160003 by CFMOTO

Genuine CFMoto Parking Switch — OEM Part #8010-160003

Restore reliable power and electronics with a genuine CFMoto Parking Switch. Built for the UForce 500 or UForce 600, this OEM part matches the factory connectors and electrical values, so you do not have to splice wires or adapt plugs.

Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 2 CFMoto models from 2008 to 2014. See the full fitment list below.

Parking Switch at a Glance

• OEM part number: 8010-160003
• Brand: CFMOTO (genuine factory part)
• Part type: Rocker Switch
• Fits: UForce utility UTV models, 2008–2014
• Condition: New

CFMoto Models and Years This Parking Switch Fits

Genuine CFMoto part #8010-160003 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto UForce utility UTV Fitment

Why Choose a Genuine CFMoto OEM Parking Switch?

• Plug-and-play fit with factory connectors
• Correct electrical ratings for your machine
• Weather-sealed for mud, water and pressure washing
• Works with the factory ECU, dash and diagnostics
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM electrical part, part #8010-160003
• Original connectors, terminals and pin-outs
• Water- and vibration-resistant construction
• Designed for the listed CFMoto models
• No splicing or adapters needed

Materials and Construction

CFMoto electrical parts use tinned copper conductors, weather-sealed connectors with silicone seals, heat- and abrasion-resistant insulation and loom, and potted or sealed housings for modules and sensors exposed to water and vibration.

Common Reasons Riders Replace This Part

• Fixing no-start, no-charge or intermittent electrical faults
• Replacing harness sections damaged by rodents, heat or abrasion
• Replacing failed switches, relays, sensors or modules
• Restoring dash functions and warning lights

Signs Your Parking Switch Needs Replacing

• No-start, clicking or intermittent power loss
• Check engine or warning lights
• Battery not charging or voltage problems
• Melted, corroded or broken connectors and wires
• Switches, gauges or accessories that do not work

Installation Tips

1. Disconnect the negative battery cable before working on electrical parts.
2. Use the CFMoto parts diagram and wiring diagram to confirm routing and connectors.
3. Inspect connectors for corrosion and clean them with electrical contact cleaner.
4. Install the new part, making sure every connector clicks fully and seals.
5. Route and secure wiring away from heat and moving parts, then test operation.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Parking Switch with these parts and supplies:

• Wiring harnesses and connectors — Harnesses, connectors and pigtails
• UTV batteries — Replacement batteries
• Fuses, relays and connectors — Fuses, relays and terminals
• Battery tenders and chargers — Keep your battery charged between rides
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Signs of a Bad UTV Ground Strap & Battery Cable Fixes
• Is Your UTV/ATV ECM Failing? Symptoms & Fixes
• How to Tell If Your UTV or ATV Stator Is Bad
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Parking Switch?

The genuine CFMoto part number is 8010-160003. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #8010-160003 fit?

It fits the UForce 500 (2008–2010); UForce 600 (2011–2014).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Will this part need programming?

Most plug-in electrical parts do not. Some control modules or keys may need dealer programming. Check your service manual or call us before ordering.

How can I find an electrical problem before buying parts?

Start with the battery, grounds and fuses. Many faults come from a loose ground or corroded connector, not a failed part.

Should I use dielectric grease on connectors?

A light coat on connector seals can help keep water out. Follow your service manual for your specific connectors.

About Availability of Part #8010-160003

CFMoto has marked this part as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network
• Stony Lonesome OHV Park — Bremen, Alabama: about 100 miles of trails