Genuine Kawasaki Passenger Grab Handle Pin — OEM Part #92043-1734
Ride safer and more comfortably with a genuine Kawasaki Passenger Grab Handle Pin. Made for the Teryx KRX, it matches the factory mounts and works with the original seat, belt and cab systems.
Seats, belts, nets and their mounts keep riders in position over rough ground. Worn or damaged parts reduce comfort and, more importantly, protection. This part is confirmed for 4 Kawasaki models from 2021. See the full fitment list below.
Passenger Grab Handle Pin at a Glance
-
OEM part number: 92043-1734
-
Brand: Kawasaki (genuine factory part)
-
Part type: Grab Handle
-
Fits: Teryx recreation side-by-side models, 2021
-
Condition: New
Kawasaki Models and Years This Passenger Grab Handle Pin Fits
Genuine Kawasaki part #92043-1734 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Teryx recreation side-by-side Fitment
| Model |
Model Years |
| Kawasaki Teryx KRX 1000 |
2021 |
| Kawasaki Teryx KRX 1000 ES |
2021 |
| Kawasaki Teryx KRX 1000 Special Edition |
2021 |
| Kawasaki Teryx KRX 1000 Trail Edition |
2021 |
Why Choose a Genuine Kawasaki OEM Passenger Grab Handle Pin?
- Factory fit with the original seat base, frame and mounts
- Restores Kawasaki's designed rider support and restraint
- Weather-resistant materials for outdoor use
- Keeps safety systems working as intended
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM part, part #92043-1734
- Original mounting points and hardware
- UV- and water-resistant covers and webbing (where applicable)
- Designed for the listed Kawasaki models
- Works with factory seat latches, belts and interlocks
Materials and Construction
Kawasaki seating parts use UV-resistant vinyl, foam that resists water absorption, and steel or plastic seat bases. Belts use high-strength polyester webbing with steel latch hardware built to factory specification.
Common Reasons Owners Replace This Part
- Replacing torn or worn seat covers and cushions
- Replacing frayed, cut or sun-damaged belts
- Fixing loose or broken seat mounts and latches
- Restoring a machine for resale
Signs Your Passenger Grab Handle Pin Needs Replacing
- Torn vinyl or waterlogged foam
- Belt webbing that is frayed, cut or faded
- Belts that do not retract or latch
- Seats that rock or will not lock in place
- Broken nets, buckles or mounts
Installation Tips
- Use the Kawasaki parts diagram to identify hardware and any belt interlock wiring.
- Remove the old part, noting how belts and wiring are routed.
- Install with the correct factory hardware.
- Torque belt anchor bolts to spec; never substitute hardware on restraint anchors.
- Test latches, retractors and interlocks before riding.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92043-1734 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Passenger Grab Handle Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Passenger Grab Handle Pin?
The genuine Kawasaki part number is 92043-1734. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92043-1734 fit?
It fits the Teryx KRX 1000 (2021); Teryx KRX 1000 ES (2021); Teryx KRX 1000 Special Edition (2021); Teryx KRX 1000 Trail Edition (2021).
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Should seat belts be replaced after an accident?
Yes. Belts that restrained a rider in a crash or rollover can be stretched or damaged and should be replaced.
Will this fit an aftermarket seat?
It is designed for the factory Kawasaki seat and mounts on the listed models.
How do I keep vinyl seats from cracking?
Keep them clean, use a UV protectant made for vinyl, and cover the machine when parked outside.
Order Your Genuine Kawasaki Passenger Grab Handle Pin Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Passenger Grab Handle Pin, OEM part #92043-1734, from Witchdoctors today and keep your Teryx KRX running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.