Genuine Kawasaki Pin 6X39 — OEM Part #92043-1625
Keep your Mule 3000 or Mule 3010 working with a genuine Kawasaki Pin 6X39. This OEM part is built to Kawasaki's original specification, so it works with the factory bed, rack or hitch without guesswork.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 8 Kawasaki models from 2001 to 2008. See the full fitment list below.
Pin 6X39 at a Glance
-
OEM part number: 92043-1625
-
Brand: Kawasaki (genuine factory part)
-
Part type: Storage & Compartments
-
Fits: Mule utility side-by-side models, 2001–2008
-
Condition: New
Kawasaki Models and Years This Pin 6X39 Fits
Genuine Kawasaki part #92043-1625 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 3000 |
2001 and earlier (2001–2008) |
| Kawasaki Mule 3010 4x4 |
2001 and earlier (2001–2008) |
| Kawasaki Mule 3010 4x4 Diesel |
2003–2007 |
| Kawasaki Mule 3010 Diesel |
2002 and earlier (2002, 2007) |
| Kawasaki Mule 3010 Diesel 4x4 |
2007 and earlier (2007–2008) |
| Kawasaki Mule 3010 Trans 4x4 |
2005 and earlier (2005, 2007–2008) |
| Kawasaki Mule 3010 Trans 4x4 Diesel |
2008 |
| Kawasaki Mule 3010 Trans 4x4l |
2006 |
Why Choose a Genuine Kawasaki OEM Pin 6X39?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM part, part #92043-1625
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, gas struts and dump-bed hardware
Materials and Construction
Kawasaki cargo and storage parts use high-strength steel for load-bearing brackets, racks, beds and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Owners Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Pin 6X39 Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Kawasaki parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Pin 6X39 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Pin 6X39?
The genuine Kawasaki part number is 92043-1625. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92043-1625 fit?
It fits 8 Kawasaki Mule models from 2001 to 2008. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by Kawasaki for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Kawasaki setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Kawasaki Pin 6X39 Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Pin 6X39, OEM part #92043-1625, from Witchdoctors today and keep your Mule 3000 or Mule 3010 running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Hatfield-McCoy Trails — southern West Virginia: multiple permit-access trail systems across the coalfields
-
Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network