Genuine Kawasaki Pin — OEM Part #92043-1636
Nothing matters more on a steep descent or a loaded trailer than brakes you can trust. The genuine Kawasaki Pin restores factory braking on your Mule models, matching the original fittings, dimensions and specification.
Lines, calipers, drums, master cylinders, pads, shoes and parking brakes work as one system. A leak, worn part or wrong fitting leads to a soft pedal or brake failure. This part is confirmed for 21 Kawasaki models from 2000 to 2027. See the full fitment list below.
Pin at a Glance
-
OEM part number: 92043-1636
-
Brand: Kawasaki (genuine factory part)
-
Part type: Brake Drums & Components
-
Fits: Mule utility side-by-side models, 2000–2027
-
Condition: New
Kawasaki Models and Years This Pin Fits
Genuine Kawasaki part #92043-1636 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 2510 Diesel |
2000 and earlier (2000–2002, 2007) |
| Kawasaki Mule 3000 |
2001 and earlier (2001–2008) |
| Kawasaki Mule 3010 4x4 |
2001 and earlier (2001–2008) |
| Kawasaki Mule 3010 4x4 Diesel |
2003–2007 |
| Kawasaki Mule 3010 Diesel |
2002 and earlier (2002, 2007) |
| Kawasaki Mule 3010 Diesel 4x4 |
2007 and earlier (2007–2008) |
| Kawasaki Mule 3010 Trans 4x4 |
2005 and earlier (2005, 2007–2008) |
| Kawasaki Mule 3010 Trans 4x4 Diesel |
2008 |
| Kawasaki Mule 3010 Trans 4x4l |
2006 |
| Kawasaki Mule 4000 |
2009–2023, 2025–2027 |
| Kawasaki Mule 4000 Trans |
2018–2021, 2025–2027 |
| Kawasaki Mule 4010 4x4 |
2009–2027 |
| Kawasaki Mule 4010 4x4 Diesel |
2010–2012 |
| Kawasaki Mule 4010 4x4 FE |
2021–2025 |
| Kawasaki Mule 4010 4x4 SE |
2016–2018 |
| Kawasaki Mule 4010 Diesel 4x4 |
2009, 2013 |
| Kawasaki Mule 4010 Trans 4x4 |
2009–2027 |
| Kawasaki Mule 4010 Trans 4x4 Camo |
2015–2023, 2025–2027 |
| Kawasaki Mule 4010 Trans 4x4 Diesel |
2009–2013 |
| Kawasaki Mule 4010 Trans 4x4 FE |
2021–2025 |
| Kawasaki Mule 4010 Trans 4x4 SE |
2016–2018 |
Why Choose a Genuine Kawasaki OEM Pin?
- Factory specification for proper feel
- Direct fit with original calipers, drums, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM brake part, part #92043-1636
- Original fittings, banjo bolts and mounting points
- Built to Kawasaki's brake system specification
- Designed for mud, water and steep terrain
- Works with the brake fluid specified in your manual
Materials and Construction
Kawasaki brake parts use reinforced brake hose, steel lines and fittings, aluminum caliper and master-cylinder bodies with fluid-compatible seals, and steel rotors, drums, pads and shoes designed for off-road use.
Common Reasons Owners Replace This Part
- Fixing a soft, spongy or sinking pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads, shoes, rotors or drums
- Restoring a parking brake that will not hold
Signs Your Pin Needs Replacing
- Spongy pedal or lever, or one that sinks
- Brake fluid leaks
- Grinding, squealing or pulling to one side
- Scored, warped or worn rotors or drums
- A parking brake that will not hold on a slope
Installation Tips
- Use the Kawasaki parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from fluid and cap open lines.
- Install with new crush washers on banjo fittings and torque to spec.
- Refill with fresh fluid of the specified type and bleed fully.
- Test brake feel and function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92043-1636 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Pin?
The genuine Kawasaki part number is 92043-1636. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92043-1636 fit?
It fits 21 Kawasaki Mule models from 2000 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type in your Kawasaki owner's manual or on the reservoir cap. Never mix DOT 5 silicone with DOT 3 or 4.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Should I replace rotors or drums with pads or shoes?
Not always. Measure them against the minimum service spec and check for scoring or warping.
Order Your Genuine Kawasaki Pin Today
Get your Mule models back to factory condition. Add the genuine Kawasaki Pin (part #92043-1636) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.