Genuine Polaris Clevis Pin 2341-B-10 x 26 — OEM Part #7662386
Get crisp, predictable control back with a genuine Polaris Clevis Pin 2341-B-10 x 26. Built for the Ranger Diesel or Ranger XP, it fits the original pivots, brackets and connectors.
Pedals, levers, cables, throttles and hand controls translate your input into action. Worn or sticky parts make the machine harder and less safe to operate. This part is confirmed for 11 Polaris models from 2019 to 2026. See the full fitment list below.
Clevis Pin 2341-B-10 x 26 at a Glance
-
OEM part number: 7662386
-
Brand: Polaris (genuine factory part)
-
Part type: Pedals & Components
-
Fits: Ranger utility side-by-side models, 2019–2026
-
Condition: New
Polaris Models and Years This Clevis Pin 2341-B-10 x 26 Fits
Genuine Polaris part #7662386 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger Diesel EPS Tractor T1b |
2020 |
| Polaris Ranger XP 1000 EPS |
2019 |
| Polaris Ranger XP 1000 EPS Abs (International) |
2026 |
| Polaris Ranger XP 1000 EPS Traktor |
2021 |
| Polaris Ranger XP 1000 EPS Trctr (International) |
2023–2024 |
| Polaris Ranger XP 1000 EPS Zug Lof |
2021 |
| Polaris Ranger XP 1000 Eu |
2019, 2022 |
| Polaris Ranger XP 1000 Intl |
2023 |
| Polaris Ranger XP 1000 Tractor |
2019, 2022 |
| Polaris Ranger XP 1000 Zug |
2022 |
| Polaris Ranger XP 1000 Zugmaschine |
2019 |
Why Choose a Genuine Polaris OEM Clevis Pin 2341-B-10 x 26?
- Factory feel, travel and return
- Direct fit with original brackets and connectors
- Built for mud, water and cold
- Restores safe, predictable control
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM control part, part #7662386
- Original mounting and adjustment
- Corrosion- and wear-resistant construction
- Designed for the listed Polaris models
- Works with factory cables, sensors and switches
Materials and Construction
Polaris control parts use steel or aluminum pedals and levers, lined and sealed cables, durable polymer bushings and grips, and sealed sensors for electronic throttles.
Common Reasons Riders Replace This Part
- Fixing sticky, binding or broken controls
- Replacing stretched or frayed cables
- Replacing bent or snapped levers and pedals
- Restoring throttle response and idle return
Signs Your Clevis Pin 2341-B-10 x 26 Needs Replacing
- Throttle that sticks or will not return
- Stretched, frayed or binding cables
- Bent or broken levers and pedals
- Excess free play
- Warnings tied to the throttle sensor
Installation Tips
- Use the Polaris parts diagram for routing, clips and adjusters.
- Route new cables exactly like the originals.
- Set free play to the service manual spec.
- Check full throttle return at full steering lock both ways.
- Test at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7662386 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Clevis Pin 2341-B-10 x 26 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Clevis Pin 2341-B-10 x 26?
The genuine Polaris part number is 7662386. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7662386 fit?
It fits 11 Polaris Ranger models from 2019 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
How do I adjust cable free play?
Use the adjuster at the lever, pedal or engine end and set it to the manual spec.
Why does my throttle stick?
Dirt in the cable, a kinked cable or a sticking throttle body. Replace damaged cables.
Are grips and hand guards model-specific?
Many are. Use the fitment table to confirm.
Order Your Genuine Polaris Clevis Pin 2341-B-10 x 26 Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Clevis Pin 2341-B-10 x 26, OEM part #7662386, from Witchdoctors today and keep your Ranger Diesel or Ranger XP running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.